Selective Extraction of Molybdenum from the spent HDS catalysts using Cyanex272 extractant

[1] Keynezhad, M. A., Soltan Mohammadzadeh, J. S., Fatehifar, E., Shahri, S., 2006, Recovery of Mo and Co from refinery spent catalysts and selection of optimum recovery process. Journal of faculty of Engineering, 33(2), 33-40. https://doi.org/10.1016/j.susmat.2021.e00286

[2] Park, K.-H., Kim, H.-I., Parhi, P., 2010, Recovery of molybdenum from spent catalyst leach solutions by solvent extraction with LIX 84-I. Separation and Purification Technology, 74(3): 294-299. https://doi.org/10.1016/j.seppur.2010.06.018

[3] Padhan, E., Sarangi, K., 2014, Separation of molybdenum and cobalt from spent catalyst using Cyanex 272 and Cyanex 301. International Journal of Mineral Processing, 127, 52-61. https://doi.org/10.1016/j.minpro.2014.01.003

[4] Zeng, L., Cheng, C.Y., 2010, Recovery of molybdenum and vanadium from synthetic sulphuric acid leach solutions of spent hydrodesulphurisation catalysts using solvent extraction. Hydrometallurgy, 101(3), 141-147. https://doi.org/10.1016/j.hydromet.2009.12.008

[5] Rydberg, J., 2004, Solvent extraction principles and practice, revised and expanded: CRC press.

[6] Sahu, K., Agrawal, A., Mishra, D., 2013, Hazardous waste to materials: Recovery of molybdenum and vanadium from acidic leach liquor of spent hydroprocessing catalyst using alamine 308. Journal of Environmental Management, 125, 68-73. https://doi.org/10.1016/j.jenvman.2013.03.032

[7] Banda, R., Sohn, S. H., Lee, M. S., 2012, Process development for the separation and recovery of Mo and Co from chloride leach liquors of petroleum refining catalyst by solvent extraction. Journal of Hazardous Materials, 213, 1-6. https://doi.org/10.1016/j.jhazmat.2011.12.078

[8] Banda, R., Nguyen, Th. H., Sohn, S. H., Lee, M. S., 2013, Recovery of valuable metals and regeneration of acid from the leaching solution of spent HDS catalysts by solvent extraction. Hydrometallurgy, 133, 161-167. https://doi.org/10.1016/j.hydromet.2013.01.006

[9] Mishra, D., Chaudhury, G. R., Kim, D. J., Ahn, J. G., 2010, Recovery of metal values from spent petroleum catalyst using leaching-solvent extraction technique. Hydrometallurgy, 101(1-2), 35-40. https://doi.org/10.1016/j.hydromet.2009.11.016

[10] Park, K. H., Kim, H. l., Parhi, P. K., Mishra, D., Nam, C. W., Park, J. T., Kim, D. J., 2012, Extraction of metals from Mo–Ni/Al2O3 spent catalyst using H₂SO₄ baking–leaching-solvent extraction technique. Journal of Industrial and Engineering Chemistry, 18(6): 2036-2045. https://doi.org/10.1016/j.jiec.2012.05.024

[11] Inoue, K., Pingwei, Z., 1993, Recovery of Mo, V, Ni and Co from spent hydrodesulphurization catalysts., American Chemical Society, Washington, DC (United States).

[12] Zhang, P., Inoue, K., Yoshizuka, K., Tsuyama, H., 1995, Recovery of metal values from spent hydrodesulfurization catalyst by solvent extraction with PIA-8. Nippon Kagaku Kaishi, 27(5), 407-412. https://doi.org/10.1246/nikkashi.1995.407

[13] Chen, R., Feng, Ch., Tan, J., Zhang, Ch., Yuan, Sh., Liu, M., Hu, H., Li, Q., Hu, J., 2022, Stepwise separation and recovery of molybdenum, vanadium, and nickel from spent hydrogenation catalyst. Hydrometallurgy, 213, 105910. https://doi.org/10.1016/j.hydromet.2022.105910

[14] Parhi, P.K., Misra, P. K., 2022, Environmental friendly approach for selective extraction and recovery of molybdenum (Mo) from a sulphate mediated spent Ni–Mo/Al₂O₃ catalyst baked leach liquor. Journal of Environmental Management, 306, 114474. https://doi.org/10.1016/j.jenvman.2022.114474

[15] Shi, K., Huang, Y., Han, G., Su, S., 2022, Selective Separation of Molybdenum from leaching solution of spent catalyst by solvent extraction with TBP. In: Lazou, A., Daehn, K., Fleuriault, C., Gökelma, M., Olivetti, E., Meskers, C. (eds) REWAS 2022: Developing Tomorrow’s Technical Cycles (Volume I). The Minerals, Metals and Materials Series., Cham. Springer International Publishing. https://doi.org/10.1007/978-3-030-92563-5_79

 [16] Valenzuela, F. R., Andrade, J. P., Sapag, J., Tapia, C., Basualto, C., 1995, The solvent extraction separation of molybdenum and copper from acid leach residual solution of Chilean molybdenite concentrate. Minerals Engineering, 8(8), 893-904. https://doi.org/10.1016/0892-6875(95)00051-Q

[17] Zhao, Z., Yang, L., Huo, G., Chen, X., Huang, H., 2011, Solvent extraction of molybdenum blue from alkaline leaching solution of the Ni–Mo ore. International Journal of Refractory Metals and Hard Materials, 29(2), 232-236. https://doi.org/10.1016/j.ijrmhm.2010.10.011

[18] Parhi, P. K., Park, K.-Ho, Kim, H.-ln, Park, J.-Tae, 2011, Recovery of molybdenum from the sea nodule leach liquor by solvent extraction using Alamine 304-I. Hydrometallurgy, 105(3-4), 195-200. https://doi.org/10.1016/j.hydromet.2010.09.004

[19] Guan, W., Zhang, G., Gao, C., 2012, Solvent extraction separation of molybdenum and tungsten from ammonium solution by H₂O₂-complexation. Hydrometallurgy, 127, 84-90. https://doi.org/10.1016/j.hydromet.2012.07.008

[20] Barik, S. P., Park, K. H., Parhi, P. K., Kim, D., J., Nam, C. W., 2014, Separation and recovery of molybdenum from acidic solution using LIX 973 N. Separation Science and Technology, 49(5), 647-655. https://doi.org/10.1080/01496395.2013.862549

[21] Zhang, P., Inoue, k., Yoshizuka, K., Tsuyama, H., 1996, Extraction and selective stripping of molybdenum (VI) and vanadium (IV) from sulfuric acid solution containing aluminum (III), cobalt (II), nickel (II) and iron (III) by LIX 63 in Exxsol D80. Hydrometallurgy, 41(1), 45-53. https://doi.org/10.1016/0304-386X(95)00015-9

[22] Rouhani, S. H. R., Davarkhah, R., Zaheri, P., Mousavian, S. M. A., 2020, Separation of molybdenum from spent HDS catalysts using emulsion liquid membrane system. Chemical Engineering and Processing-Process Intensification, 153, 107958. https://doi.org/10.1016/j.cep.2020.107958