Bidirectional High-Efficiency Converter Based on the Capacitive Wireless Power Transfer Technique for Electric Vehicle Charging and Energy Storage App

[1] M. Eberhard and M. Tarpenning, "The 21 st century electric car tesla motors," Tesla Motors, vol. 17, 2006.

[2] P. Bulman, "Tesla's Powerwall battery production requires ‘super-charged’supply chain," Renewable Energy Focus, vol. 16, no. 5-6, pp. 126-127, 2015.

[3] Y. Zhang, S. Chen, X. Li, and Y. Tang, "Design of highpower static wireless power transfer via magnetic induction: An overview," CPSS Transactions on Power Electronics and Applications, vol. 6, no. 4, pp. 281-297, 2021, doi: 10.24295/CPSSTPEA.2021.00027.

[4] F. Lu, H. Zhang, and C. Mi, "A review on the recent development of capacitive wireless power transfer technology," Energies, vol. 10, no. 11, p. 1752, 2017, doi: 10.3390/en10111752.

[5] J. Shahsevani and R. Beiranvand, "An ApplicationOriented Review of the LLC-Based Resonant Converters," IEEE Access, 2024, doi: 10.1109/ACCESS. 2024.3386430..

[6] J. Shahsevani and R. Beiranvand, "A Compact, High Efficiency, and Portable Wireless EV Resonant Charger," International Journal of Industrial Electronics Control and Optimization, 2024, doi: 10.22111/ieco.2024.49636. 1611.

[7] T. Mohamed, A. Becetti, and S. Bayhan, "Design and analysis of full bridge LLC resonant converter for wireless power transfer applications," pp. 1-5, 2018, doi: 10.1109/CPE.2018.8372606.

[8] D. Rozario, N. A. Azeez, and S. S. Williamson, "A modified resonant converter for wireless capacitive power transfer systems used in battery charging applications," in 2016 IEEE Transportation Electrification Conference and Expo (ITEC), 2016: IEEE, pp. 1-6, doi: 10.1109/ITEC.2016.7520272.

[9] H. Zhang, F. Lu, H. Hofmann, W. Liu, and C. C. Mi, "A four-plate compact capacitive coupler design and LCLcompensated topology for capacitive power transfer in electric vehicle charging application," IEEE Transactions on Power Electronics, vol. 31, no. 12, pp. 8541-8551, 2016, doi: 10.1109/TPEL.2016.2520963.

[10] E. Abramov, I. Zeltser, and M. M. Peretz, "A networkbased approach for modeling resonant capacitive wireless power transfer systems," CPSS Transactions on Power Electronics and Applications, vol. 4, no. 1, pp. 19-29, 2019, doi: 10.24295/CPSSTPEA.2019.00003.

[11] M. P. Theodoridis, "Effective capacitive power transfer," IEEE Transactions on Power Electronics, vol. 27, no. 12, pp. 4906-4913, 2012, 10.1109/TPEL.2012.2192502.

[12] J. Dai and D. C. Ludois, "Capacitive power transfer through a conformal bumper for electric vehicle charging," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 4, no. 3, pp. 1015-1025, 2015, doi: 10.1109/JESTPE.2015.2505622.

[13] S. Sinha, B. Regensburger, K. Doubleday, A. Kumar, S. Pervaiz, and K. K. Afridi, "High-power-transfer-density capacitive wireless power transfer system for electric vehicle charging," in 2017 IEEE energy conversion congress and exposition (ECCE), 2017: IEEE, pp. 967-974, doi: 10.1109/ECCE.2017.8095890.

[14] B. Regensburger, J. Estrada, A. Kumar, S. Sinha, Z. Popović, and K. K. Afridi, "High-performance capacitive wireless power transfer system for electric vehicle charging with enhanced coupling plate design," in 2018 IEEE energy conversion congress and exposition(ECCE), 2018: IEEE, pp. 2472-2477, doi: 10.1109/ECCE.2018.8557881.

[15] F. Lu, H. Zhang, and C. Mi, "A two-plate capacitive wireless power transfer system for electric vehicle charging applications," IEEE Transactions on Power Electronics, vol. 33, no. 2, pp. 964-969, 2017, doi: 10.1109/TPEL.2017.2735365.

[16] S. Zou, J. Lu, A. Mallik, and A. Khaligh, "Bi-directional CLLC converter with synchronous rectification for plugin electric vehicles," IEEE Transactions on Industry Applications, vol. 54, no. 2, pp. 998-1005, 2017, doi: 10.1109/TIA.2017.2773430.

[17] V.-B. Vu, M. Dahidah, V. Pickert, and V.-T. Phan, "An improved LCL-L compensation topology for capacitive power transfer in electric vehicle charging," IEEE Access, vol. 8, pp. 27757-27768, 2020, doi: 10.1109/ACCESS. 2020.2971961.

[18] Z. U. Zahid, Z. Dalala, and J.-S. J. Lai, "Design and control of bidirectional resonant converter for Vehicle-toGrid (V2G) applications," in IECON 2014-40th Annual Conference of the IEEE Industrial Electronics Society, 2014: IEEE, pp. 1370-1376, doi: 10.1109/IECON.2014. 7048680.

[19] J.-H. Jung, H.-S. Kim, M.-H. Ryu, and J.-W. Baek, "Design methodology of bidirectional CLLC resonant converter for high-frequency isolation of DC distribution systems," IEEE Transactions on Power Electronics, vol. 28, no. 4, pp. 1741-1755, 2012, doi: 10.1109/TPEL.2012.2213346.

[20] J. Min and M. Ordonez, "Bidirectional resonant CLLC charger for wide battery voltage range: Asymmetric parameters methodology," IEEE Transactions on Power Electronics, vol. 36, no. 6, pp. 6662-6673, 2020, doi: 10.1109/TPEL.2020.3033982.

[21] S. Toofan, B. Fathipour, and E. Babaei, "A Single Switch Transformer-Less DC-DC Converter with Continuous Input Current for Photovoltaic Applications," International Journal of Industrial Electronics Control and Optimization, 2024, doi: 10.22111/ieco.2024.48295.1548.

[22] S. Hasanpour and K. Yari, "A Minimum Phase DC-DC Converter with Continuous Input Current and High Voltage Gain," International Journal of Industrial Electronics Control and Optimization, 2024, doi: 10.22111/ieco.2024.48842.1572.

[23] J. Shahsevani and R. Beiranvand, "A Bidirectional Resonant Converter for Capacitive Power Transmission in Electric Vehicle and PowerWall Applications," in 2023 31st International Conference on Electrical Engineering (ICEE), 2023: IEEE, pp. 264-270, doi: 10.1109/ICEE 59167.2023.10334783.

[24] S. Harini, N. Chellammal, and C. B. Ramesh, "Power flow and reliability analysis of a non-isolated PV/grid connected quasi resonant converter for off-board EV charging station," International Journal of Modelling and Simulation, 2024.

[25] F. Nasr Esfahani, A. Darwish, and X. Ma, "Design and Control of a Modular Integrated On-Board Battery Charger for EV Applications with Cell Balancing," Batteries, vol. 10, no. 1, p. 17, 2024.

[26] H. Sarnago and Ó. Lucía, "Design and Experimental Verification of a Bidirectional EV On-Board Charger Featuring Multi-Phase Operation in Full Power/Voltage Ranges," IEEE Open Journal of the Industrial Electronics Society, 2024, doi: 10.1109/OJIES.2024.3406732.

[27] S.-T. Wu and Y.-W. Chiu, "Implementation of a Bidirectional 400–800V Wireless EV Charging System," IEEE Access, vol. 12, pp. 26667-26682, 2024, doi: 10.1109/ACCESS.2024.3366997.

[28] R. Patel and C. K. Panigrahi, "GaN based isolated bidirectional multiport DC-DC converter for electric vehicle charging," e-Prime-Advances in Electrical Engineering, Electronics and Energy, vol. 8, p. 100574, 2024, doi: 10.1016/j.prime.2024.100574.

[29] Y. Yue, Y. Liu, J. Zhang, H. Zhao, and J. Yang, "Hybrid Control Method of Full-Bridge LLC Resonant Converter Based on Electric Vehicle," IEEE Access, 2024.

[30] R. Gopalasami and B. Chokkalingam, "A photovoltaicpowered modified multiport converter for an EV charger with bidirectional and grid connected capability assist PV2V, G2V, and V2G," World Electric Vehicle Journal, vol. 15, no. 1, p. 31, 2024, doi: 10.3390/wevj15010031.

[31] Z. Gholami, R. Ildarabadi, H. Heydari‐Doostabad, M. Monfared, and T. O'Donnell, "Bidirectional wide range and high voltage gain buck‐boost DC‐DC converter for EV chargers empowering V2G‐G2V applications," IET Power Electronics, vol. 17, no. 2, pp. 230-250, 2024.

[32] D. Pesantez, H. Renaudineau, S. Rivera, A. Peralta, A. Marquez Alcaide, and S. Kouro, "Transformerless partial power converter topology for electric vehicle fast charge," IET Power Electronics, vol. 17, no. 8, pp. 970-982, 2024.

[33] W. M. Utomo and A. A. Bakar, "Power converter for battery charger of electric vehicle with controllable charging current," International Journal of Power Electronics and Drive Systems (IJPEDS), vol. 15, no. 2, pp. 968-977, 2024, doi: 10.11591/ijpeds.v15.i2.pp968-977.

[34] S. Hu, X. Li, and A. K. Bhat, "Operation of a bidirectional series-resonant converter with minimized tank current and wide ZVS range," IEEE Transactions on Power Electronics, vol. 34, no. 1, pp. 904-915, 2018, doi: 10.1109/TPEL.2018.2818145.

[35] Y. Zuo, X. Pan, and C. Wang, "A Reconfigurable Bidirectional isolated LLC Resonant Converter for UltraWide Voltage-gain Range applications," IEEE Transactions on Industrial Electronics, 2021, doi: 10.1109/TIE.2021.3088355.

[36] K. Colak, E. Asa, M. Bojarski, and D. Czarkowski, "A novel LLC resonant converter with semi bridgeless active rectifier," in 2014 IEEE Transportation Electrification Conference and Expo (ITEC), 2014: IEEE, pp. 1-6, doi: 10.1109/ITEC.2014.6861808.

[37] X. Tang, Y. Xing, H. Wu, and J. Zhao, "An improved LLC resonant converter with reconfigurable hybrid voltage multiplier and PWM-plus-PFM hybrid control for wide output range applications," IEEE Transactions on Power Electronics, vol. 35, no. 1, pp. 185-197, 2019, doi: 10.1109/TPEL.2019.2914945.