Torque Ripple Reduction in Modular Drive of a Non-Sinusoidal, Asymmetric Six-Phase, Permanent Magnet Synchronous Motor with Double Stator Windings using Harmonic Current Injection Strategy

[1] M. Furmanik, L. Gorel, D. Konvi, P. Rafajdus, “Comparative Study and Overview of Field-Oriented Control Techniques for Six-Phase PMSMs”, Applied. Science, vol. 11, no. 7841, pp. 1-16, 2021, [DOI:10.20944/preprints202108.0022.v1]

[2] K.S. Khan, W.M. Arshad, S. Kanerva, “On performance figures of multiphase machines”, IEEE 18th International Conference on Electrical Machines, 2008. [DOI: 10.1109/ICELMACH.2008.4799836]

[3] J.R. Fu, T.A. Lipo, “Disturbance-free operation of a multiphase current-regulated motor drive with an opened phase”, IEEE Trans. on Ind. Appl., vol. 30, pp. 1267–1274, 1994. [DOI: 10.1109/28.315238]

[4] S. Kuznetsov, “Machine design and configuration of a 7000 hp hybrid electric drive for naval ship propulsion”, IEEE International Electric Machines & Drives Conference, 2011. [DOI: 10.1109/IEMDC.2011.5994605]

[5] J.F. Hansen, F. Wendt, “History and state of the art in commercial electric ship propulsion, integrated power systems, and future trends”, Proceedings of IEEE, vol. 103, pp. 2229–2242, 2015. [DOI: 10.1109/JPROC.2015.2458990]

[6] J. Rahmanifard, “Design Optimization and Thermal Analysis of a Dual Three-Phase PM Motor for Electric Vehicles, International Journal of Industrial Electronics, Control and Optimization”, Articles in Press, Available Online from 03 May 2025, [DOI: 10.22111/ieco.2025.51426.1674]

[7] J.S. Thongam, M. Tarbouchi, A.F. Okou, D. Bouchard, R. Beguenane, “Trends in naval ship propulsion drive motor technology”, IEEE Electrical Power & Energy Conference, 2013. [DOI: 10.1109/EPEC.2013.6802942]

[8] D. Benatti, C. Alosa, E. Carfagna, F. Immovilli, E. Lorenzani, “Assessment of Master-Slave and Droop Control Strategies in Multi-Three-Phase Drives”, IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), pp. 163-168, 2021. [DOI: 10.1109/WEMDCD51469.2021.9425685]

[9] Z. Zhu, S. Wang, B. Shao, L. Yan, P. Xu, Y. Ren, “Advances in Dual-Three-Phase Permanent Magnet Synchronous Machines and Control Techniques,” Energies, vol. 14, no. 7508, pp. 1-46, 2021. [DOI:10.3390/en14227508]

[10] M. Furmanik, L. Gorel, D. Konvi, P. Rafajdus, “Comparative Study and Overview of Field-Oriented Control Techniques for Six-Phase PMSMs”, Applied. Science, vol. 11, no. 7841, pp. 1-16, 2021 [DOI:10.20944/preprints202108.0022.v1]

[11] Y. Ren, Z.Q. Zhu, “Enhancement of steady-state performance in direct torque controlled dual-three phase permanent magnet synchronous machine drives with modified switching table”, IEEE Trans. Ind. Electron. vol. 62, pp. 3338–3350, 2015 [DOI: 10.1109/TIE.2014.2376881]

[12] Y. Ren, Z.Q. Zhu, J.E. Green, Y. Li, S. Zhu, Z. Li, “Improved duty-ratio-based direct torque control for dual three-'phase permanent magnet synchronous machine drives”, IEEE Trans. Ind. Appl. vol. 55, pp. 5843–5853. 2019. [DOI: 10.1109/TIA.2019.2938468]

[13] T. Luan, Z. Wang, Y. Long, Z. Zhang, Q. Li, “MultiVirtual-Vector Model Predictive Current Control for Dual Three-Phase PMSM”, Journals of Energies, vol. 14, no. 21, 2021. [DOI: 10.3390/en14217292]

[14] S.W. Hwang, D.K. Son, S.H. Park, G.H. Lee, Y.D. Yoon, M.S. Lim, “Design and Analysis of Dual Stator PMSM With Separately Controlled Dual Three-Phase Winding for eVTOL Propulsion”, IEEE Trans. on Transportation Electrification, vol. 8, no.4, pp. 4255-4264, 2022. [DOI: 10.1109/TTE.2022.3192353]

[15] E. Levi, “Multiphase Electric Machines for VariableSpeed Applications, IEEE Press, 2018 [DOI:10.1109/TIE.2008.918488]

[16] W. Lee, S.G. Min, B. Sarlioglu, “Fault-Tolerant Operation of Six-Phase Permanent Magnet Motor Drive with Open-Circuit Failures”, IEEE Trans. on Transportation Electrification, vol. 10, no. 3, pp. 5910-5920, 2024, [DOI: 10.1109/TTE.2023.3326089]

[17] F.C. Gonçalves Pedro, M.A. Cruz Sérgio, M.S. Mendes André, “Fault-Tolerant Predictive Current Control of Six-Phase PMSMs With Minimal Reconfiguration Requirements”, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 11, no. 2, pp. 2084-2093, 2023, [DOI: 10.1109/JESTPE.2022.3223515]

[18] F.J. Lin, Y.C. Hung, M.T. Tsai, “Fault-Tolerant Control for Six-Phase PMSM Drive System via Intelligent Complementary Sliding-Mode Control Using TSKFNNAMF”, IEEE Trans. on Industrial Electronics, vol. 60, no. 12, pp. 5747-5762, 2013, [DOI: 10.1109/TIE.2013.2238877]

[19] F. Baneira, J. Doval-Gandoy, A.G. Yepes, O. López, D. Pérez-Estévez, “Comparison of Postfault Strategies for Current Reference Generation for Dual Three-Phase Machines in Terms of Converter Losses”, IEEE Trans. on Power Electronics, vol. 32, no. 11, pp. 8342-8346, 2017, [DOI: 10.1109/TPEL.2017.2691401]

[20] A. Mohammadpour, L. Parsa, “Global Fault-Tolerant Control Technique for Multiphase Permanent-Magnet Machines”, IEEE Trans. on Industry Applications vol. 51, no. 1, pp. 178-186, 2014, [DOI: 10.1109/TIA.2014.2326084]

[21] 8F. Barrero, M.J. Duran, “Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I”, IEEE Trans. on Industrial Electronics, vol. 63, no. 1, pp. 449-458, 2016. [DOI: 10.1109/TIE.2015.2447733]

[22] S. Kallio, M. Andriollo, A. Tortella, J. Karttunen, “Decoupled d-q Model of Double-Star InteriorPermanent-Magnet Synchronous Machines”, IEEE Trans. on Industrial Electronics, vol. 60, no. 6, pp. 2486-2494, 2013. [DOI: 10.1109/TIE.2012.2216241]

[23] Y. Hu, Z.Q. Zhu, M. Odavic, “Comparison of TwoIndividual Current Control and Vector Space Decomposition Control for Dual Three-Phase PMSM”, IEEE Trans. on Industry Application, vol. 53, no. 5, pp. 4483-4492, 2017. [DOI: 10.1109/TIA.2017.2703682]

[24] A.H. Almarhoon, “Sensorless Control of Dual Threephase Permanent Magnet Synchronous Machine Drives”, Ph.D. Thesis, The University of Sheffield, 2016. [DOI :10.3390/en16031326]

[25] L.R. Rocha, E.C. Silva, P.H.A. Silva, G.X. Prestes, B.C.R. Cordeiro, L.F. Pessoa, R.P. Vieira, “Evaluation Methodology of Current Control Techniques for Torque Ripple Reduction in Non-Sinusoidal PMSM”, IEEE 8th Southern Power Electronics Conference (SPEC), 2023. [DOI:10.1109/SPEC56436.2023.10407773]

[26] M.J. Nam, J.H. Kim, K.Y. Cho, H.W. Kim, Y. Cho, “Torque Ripple Reduction of an Interior PM Synchronous Motor by Compensating Harmonic Currents Based on Flux Linkage Harmonics”, Journal of Power Electronics, vol. 17, no. 5, pp. 1223-1230, 2017. [DOI:10.6113/JPE.2017.17.5.1223]

[27] S. Mu, J. Kang, Z. Zhong, Z. Ma, “Improved detecting method for multiple rotating reference frames based harmonic control of PMSMs”, Chinese Automation Congress (CAC), pp. 5458-5463, pp. 2020. [DOI: 10.1109/CAC51589.2020.9327812]

[28] J. Taylor, D.F. Valencia Garcia, W. Taha, M. Mohamadian, “Dynamic Modelling of Multiphase Machines Based on the VSD Transformation,” SAE Technical Paper 2021-01-0774, doi:10.4271/2021-01-0774, 2021. [DOI:10.4271/2021-01-0774]

[29] A. Halvaei Niasar, M. Ahmadi, S.H. Edjtahed, “Sensorless Control of Non-Sinusoidal Permanent Magnet Brushless Motor Using Selective Torque Harmonic Elimination Control Method Based on FullOrder Sliding Mode Observer”, Advances in Power Electronics Journal, vol. 2016, no. 9358604, pp. 1-13, 2016. [DOI:10.1155/2016/9358604]

[30] D.G. Luenberger, Y. Ye, “Linear and Nonlinear Programming,” Springer, 2008. [DOI: 10.2307/1240727]

[31] 24H. Ghanayem, M. Alathamneh, R.M. Nelms, “A Comparative Study of PMSM Torque Control using Proportional-Integral and Proportional-Resonant Controllers”, IEEE SoutheastCon, pp. 453-458, 2022. [DOI: 10.1109/SoutheastCon48659.2022.9764111]

[32] 25H. Park, T. Kim, Y. Suh, “Fault-Tolerant Control Methods for Reduced Torque Ripple of Multiphase BLDC Motor Drive System Under Open-Circuit Faults”, IEEE Trans. on Industry Applications, vol. 58, no. 6, pp. 7275-7285, Nov./Dec. 2022. [DOI: 10.1109/TIA.2022.3191633]