پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 834 |
| تعداد مقالات | 8,015 |
| تعداد مشاهده مقاله | 14,855,423 |
| تعداد دریافت فایل اصل مقاله | 9,588,275 |
The Study of Decrease in CO2 Emission Using Pinch Technology | ||
| Chemical Process Design | ||
| دوره 4، شماره 2، اسفند 2025، صفحه 24-37 اصل مقاله (1.69 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22111/cpd.2025.51789.1055 | ||
| نویسندگان | ||
| Mehdi Mohammadi Rahaghi؛ Majid Hayati-Ashtiani* | ||
| Department of Chemical Engineering, Faculty of Engineering, University of Kashan, Kashan, Iran. | ||
| چکیده | ||
| Naphtha hydrotreating is a refining process that removes sulfur, nitrogen, and other impurities from naphtha. CO2 Emission Pinch Analysis (CEPA) is a technique used for planning and optimizing energy systems to minimize CO2 emissions. This study aims to optimize the heat exchanger network of a naphtha hydrotreating unit based on the pinch technology with three designed scenarios to reduce the CO2 emission. In the scenario I the Heat Exchanger Network (HEN) is modified to achieve the optimum ΔTmin. using Pinch Technology. Fuel switching between natural and fuel gas is applied in scenario II for CO2 emissions reduction. An economizer installation at the furnace stack is suggested in Scenario III to increase the thermal efficiency of the furnaces and reduce CO2 emissions. Ultimately, the integration of all three scenarios is effectively performed. Scenario I reduces the energy consumption of hot utilities and CO2 emissions by 40.4% and 41.3%, respectively. The total annual cost of the unit is minimized in scenario I at the optimum ∆Tmin.=12 °C. Scenario II reduces the fuel consumption from 100 kg/h and the CO2 emission by 16%. While scenario III decreases CO2 emission by 5.5%, the new integration method of scenarios I–III provides the minimum emission reduction by 52.3%. The use of natural gas instead of fuel gas, and energy recovery from flue gas to preheat the incoming streams to the furnace in scenarios II and III are found to be the reasons for the efficient CO2 emission reduction of the hydrotreating unit. | ||
| کلیدواژهها | ||
| CO2 emission؛ Economizer؛ Energy-saving؛ Heat integration؛ Heat exchanger network؛ Pinch technology | ||
| مراجع | ||
|
[1] Zhi, K., Wang, B., Guo, L., Chen, Y., Li, W., Ocłoń, P., Wang, J., Chen, Y., Tao, H., Li, X., Varbanov, P.S., 2024. Graphical pinch analysis-based method for heat exchanger networks retrofit of a residuum hydrogenation process. Energy, 299, 131538. https://doi.org/10.1016/j.energy.2024.131538
[2] Chew, Z.T., Hoy, Z.X., Woon, K.S., Liew, P.Y., 2022. Integrating greenhouse gas reduction and waste policy targets to identify optimal waste treatment configurations via Carbon Emission Pinch Analysis. Process Safety and Environmental Protection, 160, 661-675. https://doi.org/10.1016/j.psep.2022.02.060
[3] Mostofian, T., Noori Keshtkar, M., Ebrahimi, Sh., 2023. Exergy Analysis and Heat Integration of Distillation Columns using Thermal Coupling Method for Separation of Ternary Mixture. Chemical Process Design, 2(1), 71-80, https://doi.org/10.22111/cpd.2023.45993.1024
[4] Maryam Hosseini, M., Zahra Ghazizahedi, Z., Majid Hayati-Ashtiani, M., 2025. Heat Integration of Isomerization Unit Using Loop Breaking. Chemical Process Design, 4(2), Article in press. https://doi.org/10.22111/cpd.2025.51163.1049
[5] Rajabi, R.F., Rezaei, E., Kozinski, J., 2025. Comparative minimization of CO2 emissions of methanol synthesis via tri-reforming and gas-heated reforming of methane, International Journal of Hydrogen Energy, 152, 150185. https://doi.org/10.1016/j.ijhydene.2025.150185
[6] Tan, R.R., Foo, D.C.Y., 2007. Pinch analysis approach to carbon constrained energy sector planning. Energy; 32, 1422–1429. https://doi.org/10.1016/j.energy.2006.09.018
[7] Naser, A.A., AL-Mamoori, H.S., 2024. The impact of using “WELL Standard” indicators on internal workplaces carbon emissions. Kufa Journal of Engineering, 15, 62-80. https://doi.org/10.30572/2018/kje/150105
[8] Manan, Z.A., Wan Alwi, S.R., Sadiq, M.M., Varbanov, P., 2014. Generic Carbon Cascade Analysis technique for carbon emission management. Applied Thermal Engineering, 70, 1141-1147. https://doi.org/10.1016/j.applthermaleng.2014.03.046
[9] Isah, M., Mukhtar, A., Bilyaminu, S., 2018. Energy Integration of Kero Hydrotreating Unit, A Case Study of Nigerian Refinery. Chemical Engineering & Process Technology, 9, 386. https://doi.org/10.4172/2157-7048.1000386
[10] Osman, A., Eltayeb, M., Rajab, F., 2019. Utility paths combination in HEN for energy saving and CO2 emission reduction. Processes, 7, 425. https://doi.org/10.3390/pr7070425
[11] Mrayed, S., Bin Shams, M., Al-Khayyat, M., Alnoaimi, N., 2021. Application of pinch analysis to improve the heat integration efficiency in a crude distillation unit. Cleaner Engineering and Technology, 4, 100168. https://doi.org/10.1016/j.clet.2021.100168
[12] Li, D., Li, Y., Zheng, X., Wang, J., Sun, W., 2022. Synthesis of heat exchanger network with complex phase transition based on pinch technology and carbon tax. IFAC Papers Online, 55-7, 418–423. https://doi.org/10.1016/j.ifacol.2022.07.479
[13] Diamante, J.A.R., Tan, R.R., Foo, D.C.Y., Ng, D.K.S., Aviso, K.B., Bandyopadhyay, S., 2014. Unified pinch approach for targeting of carbon capture and storage (CCS) systems with multiple time periods and regions. Journal of Cleaner Production, 71, 67-74. https://doi.org/10.1016/j.jclepro.2013.11.027
[14] Zhelev, T.K., Semkov, K.A., 2004. Cleaner flue gas and energy recovery through pinch analysis. Journal of Cleaner Production, 12, 165-170. https://doi.org/10.1016/S0959-6526(02)00192-0
[15] Ghazizahedi, Z., Hayati-Ashtiani M., 2025. Retrofitting isomerization process to increase gasoline quality and decrease CO2 emission along with energy analysis using Pinch Technology. Energy Sources Part A: Recovery, Utilization, and Environmental Effects, 47, 3778-3789. https://doi.org/10.1080/15567036.2020.1859008
[16] Tarequzzaman, Md., Khan, I., Sahabuddin, Md., Al-Amin, Md., 2024. Strategic pathways to sustainable energy: Carbon emission pinch analysis for Bangladesh’s electricity sector, Journal of Renewable and Sustainable Energy, 16, 025904. https://doi.org/10.1063/5.0179143
[17] Ramsook, D., Boodlal, D., Maharaj, R., 2023. A techno-economic quantification of carbon reduction strategies in the Trinidad and Tobago power generation sector using Carbon Emission Pinch Analysis (CEPA), Carbon Management 14, 2227159. https://doi.org/10.1080/17583004.2023.2227159
[18] Gadalla, M.A., Olujic, Z., Jansens, P.J., Jobson, M., Smith. R., 2005. Reducing CO2 emissions and energy consumption of heat-integrated distillation systems. Environmental Science & Technology, 39, 6860-6870. https://doi.org/10.1021/es049795q
[19] Gabr, E.M., Mohamed, S.M., El-Temtamy, S.A., Gendy, T., 2016. Application of energy management coupled with fuel switching on a hydrotreater unit. Egyptian Journal of Petroleum, 25, 65–74. https://doi.org/10.1016/j.ejpe.2015.03.012 | ||
|
آمار تعداد مشاهده مقاله: 242 تعداد دریافت فایل اصل مقاله: 127 |
||