پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 864 |
| تعداد مقالات | 8,349 |
| تعداد مشاهده مقاله | 16,829,767 |
| تعداد دریافت فایل اصل مقاله | 11,260,295 |
Study on Multi-Phase Boost Converters for Fuel Cell Application: Power Density and Reliability Analysis | ||
| International Journal of Industrial Electronics Control and Optimization | ||
| مقاله 12، دوره 9، شماره 4، اسفند 2026، صفحه 387-398 اصل مقاله (1.27 M) | ||
| نوع مقاله: Research Articles | ||
| شناسه دیجیتال (DOI): 10.22111/ieco.2025.52842.1712 | ||
| نویسندگان | ||
| Ghasem Rezazadeh* 1؛ Hossein Bagherian Farahabadi2 | ||
| 1School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran | ||
| 2Northern Research Center for Science & Technology, Malek Ashtar University of Technology, Fereydunkenar, Iran | ||
| چکیده | ||
| This paper presents a new comprehensive study on multi-phase interleaved DC-DC boost converters for fuel cell power interface. High power density DC-DC converters are usually required due to the volumetric and gravimetric constraints in the various fuel cell power system applications. On the other hand, in sensitive applications such as vehicular systems, using a reliable converter is a critical feature. Therefore, different multi-phase configurations with various phase numbers are investigated to find the configuration with the highest power density and reliability. Boost converters with single, two, and four-phase configurations are designed with considerably low input current and output voltage ripples compatible with the fuel cell application. Their performance parameters (especially their power densities) are investigated using the analytical and simulation results. To discuss their reliability, a reliability analysis based on a mathematical model and Markov diagram is employed to calculate the converters’ expected load loss values. In the end, among the considered configurations, the two-phase boost converter is selected to be used in fuel cell applications due to its superior performance in terms of power density and reliability. The selected boost configuration is implemented to extract the experimental results and verify the accuracy of the calculation and simulation results. | ||
| کلیدواژهها | ||
| Boost Converter؛ Multi-phase؛ Power Density؛ Reliability | ||
| مراجع | ||
|
[1] Y. Ek, et al., “Tailoring Energy Efficiency for Urban Electric Buses: The GTECM Model for Enhanced Range and Sustainable Operation Using Real-Time Big Data”, IEEE Transactions on Intelligent Transportation Systems, (Early Access), pp. 1-15, 2025, doi: 10.1109/TITS.2025.3558147.
[2] M. Vosoogh, et al., “Efficient Networked Microgrid Management Considering Plug-in Electric Vehicles and Storage Units”, International Journal of Industrial Electronics, Control and Optimization, vol. 4, no. 2, pp. 245 –255, 2021, doi: 10.22111/ieco.2020.35847.1306.
[3] I. Denholm, et al., “Optimized Interleaved Ultra-High Gain DC-DC Power Converter With Low Ripple Input Current and Voltage Stress for Fuel Cell Systems”, IEEE Access, vol. 12, no. 1, pp. 121052-121063, 2024, doi: 10.1109/ACCESS.2024.3450887.
[4] S. Sarani, et al., “An Isolated High Boost Ratio DC–DC Converter With Very Low Input Current Ripples”, IEEE Transactions on Circuits and Systems, vol. 71, no. 9, pp. 4331–4335, 2024, doi: 10.1109/TCSII.2024.3386158.
[5] L. Qin, et al., “Transformer-Less Two-Phase Interleaved Boost Converter With Wide Input Voltage Range and Low Electric Stress for Fuel Cell Vehicles”, IEEE Transactions on Power Electronics, vol. 40, no. 4, pp. 5480-5495, 2024, doi: 10.1109/TPEL.2024.3509524.
[6] A. Miremad, and S. Eren, “A Three-Level Current-Fed Dual-Active Bridge DC–DC Converter Under Dual PhaseShift Control”, IEEE Journal of Emerging and Selected Topics in Power Electronics, (Early Access), 2025, doi: 10.1109/JESTPE.2025.3561696.
[7] M. Benzine, et. al., “Experimental Validation of FaultTolerant Control With Signal-Based Diagnosis Approach for Interleaved Boost Converter in Fuel Cell Applications”, IEEE Transactions on Power Electronics, vol. 40, no. 6, pp. 8592-8603, 2025, doi: 10.1109/TPEL.2024.3520876.
[8] R. Hazratian, et al., “An Improved Boost Topology According to the Voltage Lift Technique”, International Journal of Industrial Electronics, Control and Optimization, Early access, 2025, doi: 10.22111/ieco.2025.50700.1652.
[9] N. Agrawal, et. al., “Optimal State Feedback-Integral Control of Fuel-Cell Integrated Boost Converter”, IEEE Transactions on Circuits and Systems, vol. 69, no. 3, pp. 1382-1386, 2022, doi: 10.1109/TCSII.2021.3117716.
[10] G. Li, et. al., “A DC Voltage Robust Control Strategy of Boost Converter Based on Load Impedance and Input Voltage Observation”, IEEE Transactions on Industrial Informatics, vol. 20, no. 5, pp. 7947-7956, 2024, doi: 10.1109/TII.2024.3367042.
[11] A. Mishra, et al., “Non-Linear Control of Interleaved Boost Converter Using Disturbance Observer-Based Approach”, IEEE Access, vol. 13, no. 1, pp. 23833-23840, 2025, doi: 10.1109/ACCESS.2025.3537826.
[12] L. Fernandes, et al., “Multiphase Interleaved Boost Converter With Frequency Modulation for Sensorless Current Sharing”, IEEE Transactions on Industrial Electronics, vol. 72, no. 6, pp. 5846-5856, 2025, doi: 10.1109/TIE.2024.3497341.
[13] V. Rao, and K. Sundaramoorthy, “Performance Analysis of Voltage Multiplier Coupled Cascaded Boost Converter With Solar PV Integration for DC Microgrid Application”, IEEE Transactions on Industry Applications, vol. 59, no. 1, pp. 1013-1023, 2023, doi:10.1109/TIA.2022.3209616.
[14] K. C. Omran, and R. Beiranvand, “A High Step-Up Resonant Converter Based on Current-Fed Voltage Multiplier Technique”, IEEE Transactions on Industrial Electronics, vol. 71, no. 5, pp. 4562–4575, 2024, doi: 10.1109/TIE.2023.3283715.
[15] G. Wu, et. al., “Nonisolated high step-up DC–DC converters adopting switched-capacitor cell”, IEEE Transactions on Industrial Electronics, vol. 62, no. 1, pp. 383-393, 2015, doi: 10.1109/TIE.2014.2327000.
[16] P. Wang, et al., “Input-parallel output-series DC-DC boost converter with a wide input voltage range for fuel cell vehicles”, IEEE Transactions on Vehicular Technology, vol. 66, no. 9, pp. 7771-7781, 2017, doi: 10.1109/TVT.2017.2688324.
[17] Q. Li, et al., “An Improved Floating Interleaved Boost Converter With the Zero-Ripple Input Current for Fuel Cell Applications”, IEEE Transactions on Energy Conversion, vol. 34, no. 4, pp. 2167-2179, 2019, doi: 10.1109/TEC.2019.2936416.
[18] P. Azer, and A. Emadi, “Generalized State Space Average Model for Multi-Phase Interleaved Buck, Boost and BuckBoost DC-DC Converters: Transient, Steady-State and Switching Dynamics', IEEE Access, vol. 8, no. 1, pp. 77735-77745, 2020, doi: 10.1109/ACCESS.2020.2987277.
[19] J. Gue, et al., “A Comprehensive Analysis for High-Power Density, High-Efficiency 60 kW Interleaved Boost Converter Design for Electrified Powertrains”, IEEE Transactions on Vehicular Technology, 2020, vol. 69, no. 7, pp. 7131-7145, 2020, doi: 10.1109/TVT.2020.2991395.
[20] B. Barry, et al., “Small-Signal Model of the Two-Phase Interleaved Coupled-Inductor Boost Converter”, IEEE Transactions on Power Electronics, vol. 33, no. 9, pp. 8052-8064, 2018, doi: 10.1109/TPEL.2017.2765920.
[21] E. Roshandel, et. al., “High Step-Up DC-DC Converter for Traction Drives Supplied by Fuel Cells”, 2019 IEEE Vehicle Power and Propulsion Conference (VPPC), 2019, doi: 10.1109/VPPC46532.2019.8952343.
[22] H. Tarzamni, et al., “Interleaved full ZVZCS DC–DC boost converter: analysis, design, reliability evaluations and experimental results”, IET Power Electronics, vol. 10, no. 7, pp. 835-845, 2017, doi: 10.1049/iet-pel.2016.0578.
[23] H. Tarzamni, et al., “Analysis and Reliability Evaluation of a High Step-Up Soft Switching Push–Pull DC–DC Converter”, IEEE Transactions on Reliability, vol. 69, no. 4, pp. 1376-1386, 2020, doi: 10.1109/TR.2019.2945413.
[24] H. Tarzamni, et al., “Comprehensive Analytics for Reliability Evaluation of Conventional Isolated Multiswitch PWM DC–DC Converters”, IEEE Transactions on Power Electronics, vol. 35, no. 5, pp. 5254-5266, 2020, doi: 10.1109/TPEL.2019.2944924.
[25] O. Alavi, et. al., “A Comparative Reliability Study of Three Fundamental Multilevel Inverters Using Two Different Approaches”, Electronics, vol. 5, no. 2, pp. 1-18, 2016, doi: 10.3390/electronics5020018.
[26] M. Radmehr and M. Mojibi, 'Reliability Assessment and Thermal Consideration of a Step-down DC/DC Converter', International Journal of Industrial Electronics, Control and Optimization, 2019, 2, (3), pp. 247-256 (doi: 10.22111/ieco.2019.25236.1042).
[27] US Department of Defense: “MIL-HDBK-217F (NOTICE2), Military Handbook Reliability Prediction of Electronic Equipment”, Defense Technical Information Center, 1995, doi: 10.1109/RAMS.2010.5448046.
[28] A. Khosroshahi, et. al., “Reliability Evaluation of Conventional and Interleaved DC–DC Boost Converters”, IEEE Transactions on Power Electronics, vol. 30, no. 10, pp. 5821-5828, 2015, doi: 10.1109/TPEL.2014.2380829.
[29] S. V.Dhople, et al., “A Unified Approach to Reliability Assessment of Multiphase DC–DC Converters in Photovoltaic Energy Conversion Systems”, IEEE Transactions on Power Electronics, vol. 27, no. 2, pp. 739-751, 2012, doi: 10.1109/TPEL.2010.2103329.
[30] D. Zhou, et. al., “Mission Profile Based System-Level Reliability Analysis of DC/DC Converters for a Backup Power Application”, IEEE Transactions on Power Electronics, vol. 33, no. 9, pp. 8030-8039, 2018, doi: 10.1109/TPEL.2017.2769161.
[31] B.S. Dhillon, “Engineering Systems Reliability, Safety, And Maintenance”, CRC Press Taylor & Francis Group, 2017, doi: 10.1201/9781315160535.
[32] H. S. Chung, et. al. “Reliability of Power Electronic Converter Systems”, The Institution of Engineering and Technology, 2015, doi: 10.1049/PBPO080E. | ||
|
آمار تعداد مشاهده مقاله: 156 تعداد دریافت فایل اصل مقاله: 52 |
||