تعداد نشریات | 26 |
تعداد شمارهها | 552 |
تعداد مقالات | 5,709 |
تعداد مشاهده مقاله | 7,973,836 |
تعداد دریافت فایل اصل مقاله | 5,356,073 |
A New Power Swing Detection Method Based on Hilbert Transform | ||
International Journal of Industrial Electronics Control and Optimization | ||
مقاله 1، دوره 3، شماره 2، تابستان 2020، صفحه 103-114 اصل مقاله (669.76 K) | ||
نوع مقاله: Research Articles | ||
شناسه دیجیتال (DOI): 10.22111/ieco.2019.29378.1156 | ||
نویسندگان | ||
Sirus Salehimehr1؛ Behrooz Taheri2؛ Seyed Amir Hosseini3؛ Hossein Askarian Abyaneh ![]() | ||
1Young Researcher and Elite Club, Qazvin Branch, Islamic Azad University, Qazvin, Iran | ||
2Young Researchers and Elite Club, Qazvin Branch, Islamic Azad University, Qazvin, Iran. | ||
3Department of Electrical Engineering, Golpayegan University of Technology, Isfahan, Iran | ||
4Department of Electrical Engineering, Amirkabir University of Technology, Tehran, Iran | ||
5Faculty of Electrical, Biomedical and Mechatronics Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran | ||
چکیده | ||
In this paper, a new method based on Hilbert transform is proposed to detect the power swing and faults occurring during the power swing. The proposed method operates independently from the system parameters. As well as, this method has the ability to detect different types of power swings, including stable, unstable, and multi-mode power swings, and also can differentiate the power swing from the faults for blocking or unblocking the distance relay. In order to evaluate the proposed method, various types of power swing and simultaneous faults are simulated in DIgSILENT software and then using the obtained matrix data from the current signals, the proposed algorithm has been implemented in Matlab software using the Hilbert transform. The results of this study show that the proposed method can detect different types of power swing successfully. In addition, it has been shown that the proposed method operates very fast; besides when a fault occurs simultaneously with the power swing unblocks the relay as soon as possible. This method has been also implemented practically on a distance relay and is tested by a relay tester device made by Vebko Amirkabir knowledge-based company. The results obviously show that the proposed method has a better operation than industrial conventional methods. | ||
کلیدواژهها | ||
Power swing؛ Power system protection؛ Distance relay؛ Hilbert transform | ||
مراجع | ||
[1] B. Panigrahi and R. Maheshwari, "Transmission Line Fault Detection and Classification," IEEE Proceeding of ICETECT, 2011. [2] B. Taheri, S. A. Hosseini, H. Askarian-Abyaneh, and F. Razavi, "A New Method for Remote Testing Distance Relay Using Internet Protocol Version 4," in 2019 International Conference on Protection and Automation of Power System (IPAPS), 2019, pp. 31-37: IEEE. [3] E. Udren et al., "Proposed statistical performance measures for microprocessor-based transmission-line protective relays. I. Explanation of the statistics," IEEE Transactions on Power Delivery, vol. 12, no. 1, pp. 134-143, 1997. [4] S. Zubić, P. Balcerek, and Č. Zeljković, "Speed and security improvements of distance protection based on Discrete Wavelet and Hilbert transform," Electric Power Systems Research, vol. 148, pp. 27-34, 2017. [5] B. Mahamedi, "A very fast unblocking scheme for distance protection to detect symmetrical faults during power swings," in IPEC, 2010 Conference Proceedings, 2010, pp. 378-383: IEEE. [6] J. Blackburn, "Protective Relaying Principles and Applications 2nd Edition New York Basel Marcel Dekker," ed: Inc, 1998. [7] P. S. R. Committee, "Power swing and out-of-Step considerations on transmission lines," in IEEE Power Engineering Society, 2005. [8] N. Fischer, G. Benmouyal, D. Hou, D. Tziouvaras, J. Byrne-Finley, and B. Smyth, "Do system impedances really affect power swings—Applying power swing protection elements without complex system studies," in Protective Relay Engineers, 2012 65th Annual Conference for, 2012, pp. 108-119: IEEE. [9] P. K. Nayak, J. G. Rao, P. Kundu, A. Pradhan, and P. Bajpai, "A comparative assessment of power swing detection techniques," in Power Electronics, Drives and Energy Systems (PEDES) & 2010 Power India, 2010 Joint International Conference on, 2010, pp. 1-4: IEEE. [10] S. M. Brahma, "Distance Relay With Out-of-Step Blocking Function Using Wavelet Transform," IEEE Transactions on Power Delivery, vol. 22, no. 3, pp. 1360-1366, 2007. [11] R. Dubey and S. R. Samantaray, "Wavelet singular entropy- based symmetrical fault-detection and out-of-step protection during power swing," IET Generation, Transmission & Distribution, vol. 7, no. 10, pp. 1123-1134, 2013. [12] C. Pang and M. Kezunovic, "Fast distance relay scheme for detecting symmetrical fault during power swing," IEEE Transactions on Power Delivery, vol. 25, no. 4, pp. 2205- 2212, 2010. [13] C. Lazaro, J. Marques, G. Marchesan, and G. Cardoso, "Waveform asymmetry of instantaneous current signal based symmetrical fault detection during power swing," Electric Power Systems Research, vol. 155, pp. 340-349, 2018. [14] B. Taheri, S. Salehimehr, F. Razavi, and M. Parpaei, "Detection of power swing and fault occurring simultaneously with power swing using instantaneous frequency," Energy Systems, pp. 1-24, 2019. [15] B. Taheri and F. Razavi, "Power Swing Detection Using rms Current Measurements," Journal of Electrical Engineering & Technology, vol. 13, no. 5, pp. 1831-1840, 2018. [16] I. G. Tekdemir and B. Alboyaci, "A novel approach for improvement of power swing blocking and deblocking functions in distance relays," IEEE Transactions on Power Delivery, vol. 32, no. 4, pp. 1986-1994, 2017. [17] N. G. Chothani, B. R. Bhalja, and U. B. Parikh, "New support vector machine-based digital relaying scheme for discrimination between power swing and fault," IET Generation, Transmission & Distribution, vol. 8, no. 1, pp. 17-25, 2014. [18] P. K. Nayak, A. K. Pradhan, and P. Bajpai, "A fault detection technique for the series-compensated line during power swing," IEEE transactions on power delivery, vol. 28, no. 2, pp. 714-722, 2013. [19] M. H. Musa, Z. He, L. Fu, and Y. Deng, "A covariance indices based method for fault detection and classification in a power transmission system during power swing," International Journal of Electrical Power & Energy Systems, vol. 105, pp. 581-591, 2019. [20] A. Morais, G. C. Júnior, L. Mariotto, and G. Marchesan, "A morphological filtering algorithm for fault detection in transmission lines during power swings," Electric Power Systems Research, vol. 122, pp. 10-18, 2015. [21] M. Daryalal and M. Sarlak, "Fast fault detection scheme for series-compensated lines during power swing," International Journal of Electrical Power & Energy Systems, vol. 92, pp. 230-244, 2017. [22] J. G. Rao and A. K. Pradhan, "Power-swing detection using moving window averaging of current signals," IEEE Transactions on Power Delivery, vol. 30, no. 1, pp. 368-376, 2014. [23] B. Taheri, F. Razavi, and S. Salehimehr, "Power SwingDetection Using the Variation Rates of the Average Value of Apparent Power," in 2019 International Conference on Protection and Automation of Power System (IPAPS), 2019, pp. 38-43: IEEE. [24] Abyaneh, H. Askarian, M. Marjanmehr, and M. Meshkin. "Stability analysis for power swing protection." 2004 5th Asian Control Conference (IEEE Cat. No. 04EX904). Vol. 3. IEEE, 2004. [25] S. L. Hahn, Hilbert transforms in signal processing. Artech House, 1996. [26] M. Feldman, "Hilbert transform in vibration analysis," Mechanical systems and signal processing, vol. 25, no. 3, pp. 735-802, 2011. [27] M. Pai, Energy function analysis for power system stability. Springer Science & Business Media, 2012. [28] S. Hashemi, M. Sanaye-Pasand, and M. Shahidehpour, "Fault Detection During Power Swings Using the Properties of Fundamental Frequency Phasors," IEEE Transactions on Smart Grid, 2017. [29] A. shamsi, "Reconfigurable CT QDSM with mismatch shaping dedicated to multi-mode low-IF receivers," International Journal of Industrial Electronics, Control and Optimization, vol. 2, no. 3, pp. 257-264, 2019. [30] S. SIPROTEC, "Distance Protection 7SA522 V4. 70," instruction manual, 2011. [31] J. Blumschein, Y. Yelgin, and M. Kereit, "Proper detection and treatment of power swing to reduce the risk of Blackouts," in Electric Utility Deregulation and Restructuring and Power Technologies, 2008. DRPT 2008. Third International Conference on, 2008, pp. 2440-2446: IEEE. [32] G. Ziegler, Numerical distance protection: principles and applications. John Wiley & Sons, 2011. [33] X. Lin, Y. Gao, and P. J. I. T. o. P. D. Liu, "A novel scheme to identify symmetrical faults occurring during power swings," vol. 23, no. 1, pp. 73-78, 2008. [34] J. G. Rao and A. K. J. I. t. o. p. d. Pradhan, "Differential power-based symmetrical fault detection during power swing," vol. 27, no. 3, pp. 1557-1564, 2012. [35] X. Lin, Y. Gao, and P. Liu, "A novel scheme to identify symmetrical faults occurring during power swings," IEEE Transactions on Power Delivery, vol. 23, no. 1, pp. 73-78, 2008. [36] S. Lotfifard, J. Faiz, and M. Kezunovic, "Detection of symmetrical faults by distance relays during power swings," IEEE transactions on power delivery, vol. 25, no. 1, pp. 81- 87, 2010. [37] S. M. Hashemi, M. Sanaye-Pasand, and M. Shahidehpour, "Fault Detection During Power Swings Using the Properties of Fundamental Frequency Phasors," IEEE Transactions on Smart Grid, pp. 1-1, 2018. [38] J. G. Rao and A. K. Pradhan, "Power-swing detection using moving window averaging of current signals," IEEE Transactions on Power Delivery, vol. 30, no. 1, pp. 368-376, 2015. | ||
آمار تعداد مشاهده مقاله: 618 تعداد دریافت فایل اصل مقاله: 334 |