تعداد نشریات | 27 |
تعداد شمارهها | 556 |
تعداد مقالات | 5,734 |
تعداد مشاهده مقاله | 8,018,308 |
تعداد دریافت فایل اصل مقاله | 5,389,906 |
Linear Modelling of Six Pulse Rectifier and Designee of Model Predictive Controller with Stability Analysis | ||
International Journal of Industrial Electronics Control and Optimization | ||
مقاله 11، دوره 3، شماره 4، آذر 2020، صفحه 491-501 اصل مقاله (1.24 MB) | ||
نوع مقاله: Research Articles | ||
شناسه دیجیتال (DOI): 10.22111/ieco.2020.33560.1253 | ||
نویسندگان | ||
Hamid Radmanesh1؛ Masood Saeidi ![]() ![]() | ||
1Electrical Engineering Department, Shahid Sattari Aeronautical University of Science and Technology, Tehran, Iran | ||
2power, electrical engineering, Iran university of science and Theology, Tehran, Iran | ||
چکیده | ||
The AC/DC converter is one of the popular power electronic converters in industrial applications such as in the railway, power supply systems and electric vehicle. In this paper, a three-phase controllable rectifier is considered and its linear model is extracted. Because of MPC controllers benefits, the continuous control set model predictive controller (CCs-MPC) is designed for controlling this rectifier output DC voltage. By considering rectifier dynamic response, the suitable criteria to choice the model predictive controller parameters such as sampling time, prediction horizon and control horizon is proposed. In experimental implantation the computing burden of microcontroller is limit therefore the reaching to optimal and minimum complexity in algorithms implantation is vital problem. In other words by using these proposed criteria for selection of sample time, prediction and control horizon the tradeoff between computational burden, system performance and dynamic stability is made. When using designed MPC controller, the rectifier and grid performance such as total harmonic distribution (THD), power factor (PF) and output voltage ripple have acceptable value. This controller can eliminated the effect of heavy load change on rectifier performance which is very common problem in indusial system. Also, this controller stability guaranteed is checked by using the dual-mode method. The simulation results are validated by using MATLAB software and showing the designed controller performance. | ||
کلیدواژهها | ||
Power Conversion؛ Predictive control؛ linear model؛ rectifier؛ Stability analysis | ||
مراجع | ||
[1] A. Q. Huang, "Power Semiconductor Devices for Smart Grid and Renewable Energy Systems," in Proceedings of the IEEE, vol. 105, no. 11, pp. 2019-2047, Nov. 2017. [2] T. J. Besselmann, S. Van de moortel, S. Almér, P. Jörg and H. J. Ferreau, "Model Predictive Control in the Multi-Megawatt Range," in IEEE Transactions on Industrial Electronics, vol. 63, no. 7, pp. 4641-4648, July 2016. [3] S. X. She, A. Q. Huang, Ó. Lucía and B. Ozpineci, "Review of Silicon Carbide Power Devices and Their Applications," in IEEE Transactions on Industrial Electronics, vol. 64, no. 10, pp. 8193-8205, Oct. 2017, doi: 10.1109/TIE.2017.2652401. [4] H. L. Ginn, N. Hingorani, J. R. Sullivan and R. Wachal, "Control Architecture for High Power Electronics Converters," in Proceedings of the IEEE, vol. 103, no. 12, pp. 2312-2319, Dec. 2015. [5] N. u. A. Hanif, S. A. R. Kashif and M. A. Saqib, "Multiplexed control strategy for a multi-input converter using fuzzy logic algorithm," in Electronics Letters, vol. 52, no. 15, pp. 1327-1329, 7 21 2016. [6] L. Xiong, J. Wang, X. Mi and M. W. Khan, "Fractional Order Sliding Mode Based Direct Power Control of Grid-Connected DFIG," in IEEE Transactions on Power Systems, vol. 33, no. 3, pp. 3087-3096, May 2018. [7] S. An overview of industrial model predictive control technology", Proc. Chemical Process Control-V, pp. 232-256, 1997 [8] D. Hrovat, S. Di Cairano, H. E. Tseng and I. V. Kolmanovsky, "The development of Model Predictive Control in automotive industry: A survey," 2012 IEEE International Conference on Control Applications, Dubrovnik, 2012, pp. 295-302. [9] S. Vazquez, J. Rodriguez, M. Rivera, L. G. Franquelo and M. Norambuena, "Model Predictive Control for Power Converters and Drives: Advances and Trends," in IEEE Transactions on Industrial Electronics, vol. 64, no. 2, pp. 935-947, Feb. 2017. [10] C. Bordons and C. Montero, "Basic Principles of MPC for Power Converters: Bridging the Gap Between Theory and Practice," in IEEE Industrial Electronics Magazine, vol. 9, no. 3, pp. 31-43, Sept. 2015. [11] M. Féher, O. Straka, V. Šmídl and Š. Janouš, "Constrained time-optimal control of PMSM with continuous control domain," 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), Pilsen, 2017, pp. 42-47. [12] K. G. Pavlou, M. Vasiladiotis and S. N. Manias, "Constrained model predictive control strategy for single-phase switch-mode rectifiers," in IET Power Electronics, vol. 5, no. 1, pp. 31-40, January 2012. [13] Jose Rodriguez; Patricio Cortes, "Model Predictive Control," in Predictive Control of Power Converters and Electrical Drives , 1, Wiley-IEEE Press, 2012, pp.31-39. [14] J. Rodriguez et al., "State of the Art of Finite Control Set Model Predictive Control in Power Electronics," in IEEE Transactions on Industrial Informatics, vol. 9, no. 2, pp. 1003-1016, May 2013. [15] P. Karamanakos, T. Geyer, N. Oikonomou, F. D. Kieferndorf and S. Manias, "Direct Model Predictive Control: A Review of Strategies That Achieve Long Prediction Intervals for Power Electronics," in IEEE Industrial Electronics Magazine, vol. 8, no. 1, pp. 32-43, March 2014. [16] A. A. Ahmed, B. K. Koh and Y. I. Lee, "A Comparison of Finite Control Set and Continuous Control Set Model Predictive Control Schemes for Speed Control of Induction Motors," in IEEE Transactions on Industrial Informatics, vol. 14, no. 4, pp. 1334-1346, April 2018. [17] A. S. de Morais, F. Lessa Tofoli and I. Barbi, "Modeling, Digital Control, and Implementation of a Three-Phase Four-Wire Power Converter Used as a Power Redistribution Device," in IEEE Transactions on Industrial Informatics, vol. 12, no. 3, pp. 1035-1042, June 2016. [18] Seung-Ki Sul, "Basic Structure and Modeling of Electric Machines and Power Converters," in Control of Electric Machine Drive Systems, 1, Wiley-IEEE Press, 2011, pp.36-115. [19] A.Taheri , N.Asgari "Sliding Mode Control of LLC DCDC Converter for Wide Output Voltage Range i n Battery Charging” International Journal of Industri al Electronics, Control and Optimization (IECO), Vol 2, Issue 2, , PP 127-136 spring 2019. [20] A. El Kachani, E. M. Chakir, A. A. Laachir, T. Jarou and A. Hadjoudja, "Nonlinear model predictive control applied to a DFIG-based wind turbine with a Shunt APF," 2016 International Renewable and Sustainable Energy Conference (IRSEC), Marrakech, 2016, pp. 369-375. [21] Mohsen Ehsani1, Masood Saeidi, Hamid Radmanesh, Adib Abrishamifar " Comparisons between Generalized Predictive Control and Linear Controllers in Multi-Input DC-DC Boost Converter ", International Journal of Industrial Electronics, Control and Optimization (IECO), Vol. 1, No. 3, pp. 27-34, Jan 2020. [22] Thomas, "Particle swarm optimization based model predictive control for constrained nonlinear systems," 2014 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO), Vienna, Austria, 2014, pp. 397-403. [23] L. Dai, Y. Xia, Y. Gao and M. Cannon, "Distributed Stochastic MPC of Linear Systems With Additive Uncertainty and Coupled Probabilistic Constraints," in IEEE Transactions on Automatic Control, vol. 62, no. 7, pp. 3474-3481, July 2017. [24] M. A. Santoyo Anaya, J. R. Rodriguez-Rodriguez, E. L. Moreno-Goytia, V. Venegas-Rebollar and N. M. Salgado Herrera, "Current-Sensorless VSC-PFC Rectifier Control with enhance response to dynamic and sag conditions using a single PI loop," in IEEE Transactions on Power Electronics, vol. PP, no. 99, pp. 1-1. Sep 2017 [25] S. Vazquez et al., "Model Predictive Control: A Review of Its Applications in Power Electronics," in IEEE Industrial Electronics Magazine, vol. 8, no. 1, pp. 16-31, March 2014. [26] T. Peterson, E. Hernández, Y. Arkun and F. Schork, "A nonlinear DMC algorithm and its application to a semibatch polymerization reactor", Chemical Engineering Science, vol. 47, no. 4, pp. 737-753, 1992. [27] M. Haeri, "Improved EDMC for the processes with high variations and/or sign changes in steady‐state gain", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, vol. 23, no. 2, pp. 361-380, 2004. [28] J. C. Basilio and S. R. Matos, "Design of PI and PID controllers with transient performance specification," in IEEE Transactions on Education, vol. 45, no. 4, pp. 364-370, Nov 2002. [29] R. Mendez, D. Sbarbaro and J. Espinoza, "High dynamic and static performance FCS-MPC strategy for static power converters," 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 2016, pp. 1-7. [30] G. Deshmukh, J. Aute and A. Gupta, "Explicit model predictive control for disturbance rejection and tracking control of boost converter," 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), Delhi, 2016, pp. 1-5. [31] T. Besselmann, J. Lofberg and M. Morari, "Explicit MPC for LPV Systems: Stability and Optimality," in IEEE Transactions on Automatic Control, vol. 57, no. 9, pp. 2322-2332, Sept. 2012. [32] R. Shridhar and D. Cooper, "A Tuning Strategy for Unconstrained SISO Model Predictive Control", Industrial & Engineering Chemistry Research, vol. 36, no. 3, pp. 729-746, 1997. [33] A. Linder, R. Kanchan, R. Kennel, and P. Stolze, "Model-Based Predictive Control of Electric Drives" Göttingen, Germany: Cuvillier Verlag, 2010. [34] D. Clarke, C. Mohtadi and P. Tuffs, "Generalized predictive control—Part I. The basic algorithm", Automatica, vol. 23, no. 2, pp. 137-148, 1987. [35] C. Rajhans, S. Patwardhan, and H. Pillai, "Discrete Time Formulation of Quasi Infinite Horizon Nonlinear Model Predictive Control Scheme with Guaranteed Stability", IFAC-PapersOnLine, vol. 50, no. 1, pp. 7181-7186, 2017. [36] Mayne and J. Rawlings, "Correction to “Constrained model predictive control: stability and optimality”", Automatica, vol. 37, no. 3, p. 483, 2001. [37] Cannon, Mark Clas lecture Topic" Model Predictive Control", C21, department of engineering science University of Oxford, Oxford, 2013. [38] I. Zaidi, M. Chaabane, F. Tadeo and A. Benzaouia, "Static State-Feedback Controller and Observer Design for Interval Positive Systems With Time Delay," in IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 62, no. 5, pp. 506-510, May 2015. | ||
آمار تعداد مشاهده مقاله: 104 تعداد دریافت فایل اصل مقاله: 139 |