تعداد نشریات | 27 |
تعداد شمارهها | 604 |
تعداد مقالات | 6,159 |
تعداد مشاهده مقاله | 9,107,418 |
تعداد دریافت فایل اصل مقاله | 5,939,265 |
An Electrical Energy Regeneration Scheme for Energy Harvesting From a Vibration Absorption System in Tall Buildings | ||
International Journal of Industrial Electronics Control and Optimization | ||
دوره 5، شماره 2، شهریور 2022، صفحه 167-176 اصل مقاله (4.86 M) | ||
نوع مقاله: Research Articles | ||
شناسه دیجیتال (DOI): 10.22111/ieco.2022.41487.1412 | ||
نویسندگان | ||
Amir Abolmasoumi ![]() ![]() | ||
11. Electrical Engineering Department, Arak University, Arak, 38156-8-8349, Iran. 2. Research Institute of Renewable Energy, Arak University, Arak, 38156-8-8349, Iran | ||
2Department of Mechatronics, Arak University, Arak, 38165-8-8349, Iran. | ||
3Department of Mechanics, Arak University, Arak, 38156-8-8349, Iran. | ||
4Electrical Engineering Department, Arak University, Arak, 38156-8-8349, Iran. | ||
چکیده | ||
Electrical energy regeneration and storage in a tall structure with the installed passive pendulum tuned mass and damper (PPTMD) is investigated. While the passive vibration absorbing system works as an energy harvesting device, an electrical system including an electric motor, power electronic converters, a battery charger and storage subsystem are designed in order to store the energy taken from the structure vibrations which may be resulted from various external disturbances such as wind or earthquakes. The whole 76-story structure and the relevant electrical energy regeneration system are modeled and simulated and the design scheme is implemented on a two-story reduced order lab structure equipped with PPTMD, the electronic circuit and the battery. A boost AC rectifier is designed and controlled to rectify the AC output voltage and is followed by a boost DC-DC converter as a battery charger for the Li-ion battery. A passivity-based controller (PC) and a sliding mode controller are designed for the rectifier and the battery charger, respectively. The simulation and the real test results demonstrate the efficient harvesting and storage of the energy extracted from the building. | ||
کلیدواژهها | ||
Energy regeneration؛ Boost AC rectifier؛ Boost DC-DC converter؛ Passivity-based control؛ and Sliding mode control | ||
مراجع | ||
[1] M. M. Ali and K. S. Moon, “Structural developments in tall buildings: current trends and future prospects,” Architectural science review, vol. 50, no. 3, pp. 205–223, 2007.
[2] Soong and B. Spencer Jr Reviewer, “Active structural control: theory and practice,” Journal of Engineering Mechanics, vol. 118, no. 6, pp.1282–1285, 1992.
[3] B. Spencer Jr and S. Nagarajaiah, “State of the art of structural control,” Journal of structural engineering, vol. 129, no. 7, pp. 845–856, 2003.
[4] B. Kavyashree, S. Patil, and V. S. Rao, “Review on vibration control in tall buildings: from the perspective of devices and applications,” International Journal of Dynamics and Control, vol. 9, no. 3, pp.1316–1331, 2021.
[5] Parulekar and G. Reddy, “Passive response control systems for seismic response reduction: A state-of-the-art review,” International Journal of Structural Stability and Dynamics, vol. 9, no. 01, pp. 151–177, 2009.
[6] M. D. Symans and M. C. Constantinou, “Semi-active control systems for seismic protection of structures: a state-of-the-art review,” Engineering structures, vol. 21, no. 6, pp. 469–487, 1999.
[7] M. Soleymani, T. Asgari, and M. Sadeghi, “Design and implementation of a semi-active structural control system using shake table test,” Sharif Journal of Civil Engineering, vol. 35, no.2.2, pp. 133–142, 2019.
[8] Korkmaz, “A review of active structural control: challenges for engineering informatics,” Computers & Structures, vol. 89, no. 23-24,pp. 2113–2132, 2011.
[9] A. Khalatbarisoltani, M. Soleymani, and M. Khodadadi, “Online control of an active seismic system via reinforcement learning,” Structural Control and Health Monitoring, vol. 26, no. 3, p. e2298, 2019.
[10] A. Preumont, Vibration control of active structures: an introduction. Springer, 2018, vol. 246.
[11] M. Soleymani, A. H. Abolmasoumi, H. Bahrami, A. Khalatbari-S, E. Khoshbin, and S. Sayahi, “Modified sliding mode control of aseismic active mass damper system considering model uncertainties and input time delay,” Journal of Vibration and Control, vol. 24, no. 6,pp. 1051–1064, 2018.
[12] E. Khoshbin, A. H. Abolmasoumi, M. Soleymani, and A. Khalatbari, “Generalized active disturbance rejection control of structures under seismic disturbance considering time delays,” Structural Control and Health Monitoring, vol. 25, no. 1, p. e2029, 2018.
[13] D. Botto and M. Umer, “A novel test rig to investigate under-platform damper dynamics,” Mechanical Systems and Signal Processing, vol.100, pp. 344–359, 2018.
[14] S. Gong and Y. Zhou, “Experimental study and numerical simulationon a new type of viscoelastic damper with strong nonlinear characteristics,” Structural Control and Health Monitoring, vol. 24, no. 4, p.e1897, 2017.
[15] F. Rahimi, R. Aghayari, and B. Samali, “Application of tuned mass dampers for structural vibration control: a state-of-the-art review,” Civil Engineering Journal, pp. 1622–1651, 2020.
[16] A. Di Matteo, T. Furtmuller, C. Adam, and A. Pirrotta, “Optimal design of tuned liquid column dampers for seismic response control of base-isolated structures,” Acta Mechanica, vol. 229, no. 2, pp. 437–454, 2018.
[17] L. Wang, W. Shi, and Y. Zhou, “Study on selfadjustable variable pendulum tuned mass damper,” The Structural Design of Tall and Special Buildings, vol. 28, no. 1, p. e1561, 2019.
[18] Wang, Liangkun, Weixing Shi, and Ying Zhou. "Study on self-adjustable variable pendulum tuned mass damper." The Structural Design of Tall and Special Buildings, vol. 28, no. 1, p e1561, 2019.
[19] H. S. Kim, J.-H. Kim, and J. Kim, “A review of piezoelectric energy harvesting based on vibration,” International journal of precision engineering and manufacturing, vol. 12, no. 6, pp. 1129–1141, 2011.
[20] H. Wang, A. Jasim, and X. Chen, “Energy harvesting technologies in roadway and bridge for different applications–a comprehensive review,” Applied Energy, vol. 212, pp. 1083–1094, 2018.
[21] H.-X. Zou, L.-C. Zhao, Q.-H. Gao, L. Zuo, F.-R. Liu, T. Tan, K.-X. Wei, and W.-M. Zhang, “Mechanical modulations for enhancing energy harvesting: Principles, methods and applications,” Applied Energy, vol. 255, p. 113871, 2019.
[22] M. Gholikhani, H. Roshani, S. Dessouky, and A. Papagiannakis, “Acritical review of roadway energy harvesting technologies,” Applied Energy, vol. 261, p. 114388, 2020.
[23] S. Hassanli, K. Chauhan, M. Zhao, and K. C. Kwok, “Application of through-building openings for wind energy harvesting in built environment,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 184, pp. 445–455, 2019.
[24] Y.-F. Su, R. R. Kotian, and N. Lu, “Energy harvesting potential of bendable concrete using polymer based piezoelectric generator,” Composites Part B: Engineering, vol. 153, pp. 124–129, 2018.
[25] Y. Luo, H. Sun, X. Wang, L. Zuo, and N. Chen, “Wind induced vibration control and energy harvesting of electromagnetic resonant shunt tuned massdamper-inerter for building structures,” Shock and Vibration, vol. 2017, pp. 1-13. 2017.
[26] W. Shen, S. Zhu, H. Zhu, and Y.-l. Xu, “Electromagnetic energy harvesting from structural vibrations during earthquakes,” Smart structures and systems, vol. 18, no. 3, pp. 449–470, 2016.
[27] G. Mohebalizadeh, H. Alipour, L. Mohammadian, and M. Sabahi, “An improved sliding mode controller for DC/DC boost converters used in EV battery chargers with robustness against the input voltage variations,” International Journal of Industrial Electronics Control and Optimization, vol. 4, no. 2, p. 257-266, 2021.
[28] V. Utkin, “Sliding mode control of DC/DC converters,” Journal of the Franklin Institute, vol. 350, no. 8, p. 21462165, 2013
[29] R. Clough and J. Penzien, “Dynamics of structures (3rd),” Computers & Structures, Inc., California, pp. 342–344, 2003.
[30] J. P. Den Hartog, Mechanical vibrations. Courier Corporation, 1985.
[31] D. Williams, “How the boost PFC converter circuit improves power quality,” Available: https://www.allaboutcircuits.com/technical-articles/howthe-boost-pfc-converter-circuit-improves-power-quality/, 2016.
[32] J.C. Salmon, “Circuit topologies for single-phase voltagedoubler boost rectifiers,” IEEE Transactions on Power Electronics, vol. 8, no. 4, p.521-529, 1993.
[33] J. Sastry, O. Ojo, and Z. Wu, “High-performance control of a boost AC–DC PWM rectifier/induction generator system,” IEEE transactions on industry applications, vol. 42, no. 5, p.1146-1154, 2006.
[34] M. Monfard, M. Babaei, and S. Sharifi, “A z-source network integrated buck-boost PFC rectifier,” International journal of industrial electronics control and optimization, vol. 2, no. 4, p.289-296, 2019.
[35] H. J. Sira-Ramirez, and S. O.Ramón, “Control design techniques in power electronics devices,” Springer Science & Business Media, 2006.
[36] M. Feizi, R. Beiranvand, and M. Daneshfar, “An integrated high power self-equalized battery charger using a voltage multiplier and phase-shifted full-bridge DC-DC converter for lithium-ion batteries,” International Journal of Industrial Electronics Control and Optimization, vol. 4, no. 2, p. 141155, 2021.
[37] A. Taheri, and N. Asgari, “Sliding mode control of LLC resonant DC-DC converter for wide output voltage range in battery charging applications,” International Journal of Industrial Electronics Control and Optimization, vol. 2, no. 2, p.127-136, 2019.
[38] P. Memarzadeh, M. Saadatpour, and M. Azhari, “Nonlinear dynamic response and ductility requirements of a typical steel plate shear wall subjected to El Centro earthquake,” Iranian Journal of Science and Technology Transaction B- Engineering, vol. 34, no. B4, pp. 371-384, 2010.
[39] N. Rajabi, A. H. Abolmasoumi, and M. Soleymani, “Sliding mode trajectory tracking control of a ball-screwdriven shake table based on online state estimations using EKF/UKF,” Structural Control and Health Monitoring, vol. 25, no. 4, p. e2133, 2018.
[40] M. Soleymani and A. H. Abolmasoumi, “Fuzzy-sliding mode supervisory control of an electric seismic shake table,” transformation, p. 1, 2016.
[41] S. Sayahi, M. Hamidizadeh, H. Moradzadeh, M. Soleymani, and M. Rahmani, “Fuzzy control of a seismic shake table using a vision-based displacement measurement system.” Modares Mechanical Engineering, vol. 14, no. 14, 2015.
| ||
آمار تعداد مشاهده مقاله: 214 تعداد دریافت فایل اصل مقاله: 159 |