تعداد نشریات | 31 |
تعداد شمارهها | 707 |
تعداد مقالات | 6,896 |
تعداد مشاهده مقاله | 11,286,870 |
تعداد دریافت فایل اصل مقاله | 7,590,739 |
Design and Optimization of a Very High Speed Three Phase Bearingless Induction Motor | ||
International Journal of Industrial Electronics Control and Optimization | ||
مقاله 4، دوره 6، شماره 4، اسفند 2023، صفحه 283-289 اصل مقاله (1020.06 K) | ||
نوع مقاله: Research Articles | ||
شناسه دیجیتال (DOI): 10.22111/ieco.2023.45551.1476 | ||
نویسنده | ||
Hamed Azadrou* | ||
Azad University, Salmas Branch | ||
چکیده | ||
This paper explores the application of high-speed bearingless induction motors within compressor systems. These motors utilize two distinct electromagnetic fields to generate both torque and suspension forces, making them suitable for applications requiring high speed with an efficient operation. However, a significant challenge arises from the interference between these fields, which can negatively impact motor performance. To address this issue, we propose a new rotor structure that mitigates the interference problem. The proposed structure is based on the utilization of multiple dual-pole rotors positioned together, each of which is electrically separate from the others. Subsequently, we focus on optimizing the motor's dimensions to enhance both torque generation and suspension force capabilities. To achieve this optimization, a modern genetic algorithm is employed, allowing for comprehensive exploration of the design space. The results of the proposed optimized motor are compared with those of a motor optimized using a conventional algorithm. The findings affirm the effectiveness of our approach in improving motor performance. | ||
کلیدواژهها | ||
Bearingless motor؛ finite element analysis؛ high speed compressors | ||
مراجع | ||
[1] A. Chiba, T. Fukao, O. Ichikawa, M. Oshima, M. Takemoto, and D. G. Dorrel, "Magnetic bearings and bearingless drives," in Proc. Liacre House, Joordan Hill. Oxford OX2 8DP, 30 Corporate Drive, Burlington, MA 01803, DOI: 10.1016/B978-0-7506-5727-3.X5000-7.
[2] J. Chen, J. Zhu, and E. L. Severson, "Review of bearingless motor technology for significant power application," IEEE Trans. on Ind. Appl., vol. 56, no. 2, pp. 1377-1388, 2021. [3] T. Pei, D. Li, J. Liu, J. Li, and W. Kong, "Review of bearingless synchronous motors: principle and topology," IEEE Trans. on Trans. Electrification, vol. 8, no. 3, pp. 3489-3502, 2022. [4] T. Tera, Y. Yamauchi, A. Chiba, T. Fukao, and M. A. Rahman, "Performances of bearingless and sensorless induction motor drive based on mutual inductances and rotor displacements estimation," IEEE Trans. on Ind. Elec., vol. 53, no. 1, pp. 187-195, 2006. [5] D. Steinert, T. Nussbaumer, and J. W. Kolar, "Concept of a 150 krpm bearingless slotless disc drive with combined windings," in Proc. IEEE Int. Electric Mach. Drives Conf., pp. 311-318, 2013. [6] J. Chen, Y. Fujii, M. W. Johnson, A. Farhan, and E. L. Severson, "Optimal design of the bearingless induction motor," IEEE Trans. on Ind. Appl., vol. 57, no. 2, pp. 1375-1389, 2021. [7] Y. Jiang and E. L. Severson, "Floating capacitor suspension inverter for parallel combined winding bearingless motors," IEEE Trans. on Ind. Appl., vol. 56, no. 2, pp. 1518–1528, 2020. [8] E. L. Severson, S. Gandikota, and N. Mohan, "Practical implementation of dual-purpose no-voltage drives for bearingless motors," IEEE Trans. on Ind. Appl., vol. 52, no. 2, pp. 1509–1518, 2016. [9] R. Abebe, M. D. Nardo, D. Gerada, G. L. Calzo, L. Papini, and C. Gerada, "High-speed drives review: machines, converters, and applications," in Proc. IECON 42nd Annual Conf., IEEE Ind. Elec. Society, 2016. [10] P. Beer, J. E. Tessaro, B. Eckels, and P. Geberson, "High-speed motor design for gas compressor applications," in Proc. Proceedings of the thirty-fifth turbomachinery symposium, 2006. [11] W. L. Soong, G. B. Kliman, R. N. Johnson, R. A. White, and J. E. Miller, "Novel high-speed induction motor for a commercial centrifugal compressor," IEEE Trans. on Ind. Appl., vol. 36, no. 3, pp. 706-714, 2000. [12] J. J. Guerrero, A. Wright, and N. Bhatia, "LNG compressor driver trends gas turbines vs. electric motors," in Proc. IEEE IAS Petroleum and Chemical Industry Technical Conference (PCIC), 2021. [13] R. Lateb, J. Enon, L. Durantay, "High-speed, high-power electrical induction motor technologies for integrated compressors," in Proc. International Conf. on Elec. Machines and Sys., ICEMS, 2009. [14] J. Pyrhonen, T. Jokinen, and V. Hrabovcová, "Design of Rotating Electrical Machines," Hoboken, NJ, USA: Wiley, ISBN: 978-1-118-58157-5, 2009. [15] J. Chen, and E. L. Severson, "Design and modeling of the bearingless induction motor," in Proc. IEEE International Elec. Machines Drives Conf. (IEMDC), 2019. [16] K. Li, G. C, X. Sun, Z. Yang, and Y. Fan, "Performance optimization design and analysis of bearingless induction motor with different magnetic slot wedges," Results in Physics, vol. 12, pp. 349-356, 2019. [17] A. Smirnov, N. Uzhekov, T. Sillanpaa, J. Pyrhonen, and O. Pyrhonen, "High-speed electrical machine with active magnetic bearing system optimization," IEEE Trans. on Ind. Elec., vol. 64, no. 12, pp. 9876-9886, 2017. [18] M. Soltanpour, H. Abdollahi, and S. Masoudi, "Optimisation of Double Sided Linear Switched Reluctance Motor for Mass and Force Ripple Minimization," IET Science, Measurement and Technology, vol. 13, no. 4, pp. 509-517, 2019. [19] K. Deb, A. Pratap, S. Agarwal, "A fast and elitist multi-objective genetic algorithm: NSGA-II," IEEE Trans. on Evolutionary Computation, vol. 6, no. 2, pp. 182-197, 2002. [20] A. Teymourifar, A. M. Rodrigues, J. S. Ferreira, "A comparison between NSGA-II and NSGA-III to solve multi objective sectorization problems based on statistical parameter tuning," in Proc. 24th International Conference on Circuits, Systems, Communications, and Computers (CSCC), 2020. [21] A. Azadrou, S. Masoudi, Sh. Gharaati, "An improved linear switched reluctance motor for elevator application," in Proc. International of Industrial Electronics Control and Optimization (IECO), pp. 297-304, 2022. | ||
آمار تعداد مشاهده مقاله: 172 تعداد دریافت فایل اصل مقاله: 145 |