پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 825 |
| تعداد مقالات | 7,903 |
| تعداد مشاهده مقاله | 14,563,027 |
| تعداد دریافت فایل اصل مقاله | 9,430,191 |
Impact of Blending Basrah and Kirkuk Light Oils on Refining Processes | ||
| Chemical Process Design | ||
| مقاله 2، دوره 3، شماره 1، شهریور 2024، صفحه 16-26 اصل مقاله (1.77 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22111/cpd.2024.49525.1037 | ||
| نویسندگان | ||
| Esmaeil Koohestanian* 1؛ Maliheh Ghofran Pakdel2 | ||
| 1Department of Chemical Engineering, Iranshahr Branch, Islamic Azad University, Iranshahr, Iran | ||
| 2Department of Chemical Engineering, University of Sistan and Baluchestan, P.O.Box 98164-161, Zahedan, Iran. | ||
| چکیده | ||
| This study aims to investigate the effects of mixing Basrah and Kirkuk light oil and simulate the process using Aspen Plus software. Crude oil blending has gained significant attention recently due to its potential for optimizing oil properties and enhancing refinery efficiency. In this research, a comprehensive analysis is conducted on the physical and chemical characteristics of the resulting mixture. The study begins with a detailed review of the properties and composition of Basrah and Kirkuk light oil, highlighting their strengths and weaknesses. This involves analyzing the impact of blending on key parameters, such as viscosity, density, sulfur content, and API gravity. Subsequently, the Aspen Plus software models the mixing process, considering temperature, pressure, and flow rates. By employing various simulation techniques, the behavior of the mixture under different operating conditions is thoroughly examined. As distillation progresses to approximately 90%, the API gravity of the oil drops by about 10 degrees. To process more than 60% of this oil, a vacuum and superheated steam system is necessary to break down the remaining heavy molecules. When refiners blend crude oils, a higher yield product (about 3%) can be produced from the atmospheric and vacuum distillation units. The findings can assist refinery operators and engineers in making informed decisions regarding crude oil blending strategies, ultimately leading to enhanced operational efficiency and improved product quality. | ||
| کلیدواژهها | ||
| Petroleum refinery؛ Process design؛ Basrah light oil؛ Kirkuk light oil؛ Crude oil blending؛ Atmospheric distillation | ||
| مراجع | ||
|
[1] Al-Khafaji, A.J., Hakimi, M.H., Najaf, A.A., 2018. Organic geochemistry characterisation of crude oils from Mishrif reservoir rocks in the southern Mesopotamian Basin, South Iraq: Implication for source input and paleoenvironmental conditions, Egyptian Journal of Petroleum, 27(1), 117-130. https://doi.org/10.1016/j.ejpe.2017.02.001
[2] Kareem, K.K.H., Abdulla, S.S., 2023. Determination of heavy metals and total petroleum hydrocarbons in soil samples and plant leaves around oil refineries located on erbil-gwer road, Science Journal of University of Zakho, 11(4), 492-498. https://doi.org/10.25271/sjuoz.2023.11.4.1169
[3] Ma, Y., Shi, L., Liu, Y., Lu, Q., 2017. Effects of Neutralization, decoloration, and deodorization on polycyclic aromatic hydrocarbons during laboratory‐scale oil refining process, Journal of Chemistry, 2017(1), 7824761. https://doi.org/10.1155/2017/7824761
[4] Emberru, R.E., Patel, R., Mujtaba, I.M., John, Y.M., 2024. A Review of Catalyst Modification and Process Factors in the Production of Light Olefins from Direct Crude Oil Catalytic Cracking, Journal of SCI, 6(1), 11. https://doi.org/10.3390/sci6010011
[5] Muhsin, W., Zhang, J., 2022. Multi-objective optimization of a crude oil hydrotreating process with a crude distillation unit based on bootstrap aggregated neural network models, Journal of Processes, 10(8), 1438. https://doi.org/10.3390/pr10081438
[6] Widyasanti, A., Nurjanah, S., Nurhadi, B., Osman, C.P., 2023. Optimization of the Vacuum Fractional Distillation Process for Enhancing the α-Guaiene of Patchouli Oil with Response Surface Methodology, Journal of Separations, 10(9), 469. https://doi.org/10.3390/separations10090469
[7] Bayomie, O.S., Abdelaziz, O.Y., Gadalla, M.A., 2019. Exceeding Pinch limits by process configuration of an existing modern crude oil distillation unit–A case study from refining industry, Journal of Cleaner Production, 231, 1050-1058. https://doi.org/10.1016/j.jclepro.2019.05.041
[8] Koohestanian, E., Shahraki, F., 2021. Review on principles, recent progress, and future challenges for oxy-fuel combustion CO2 capture using compression and purification unit, Journal of Environmental Chemical Engineering, p. 105777. https://doi.org/10.1016/j.jece.2021.105777
[9] Demirbas, A., Alidrisi, H., Balubaid, M., 2015, API gravity, sulfur content, and desulfurization of crude oil, Petroleum Science and Technology, 33(1), 93-101. https://doi.org/10.1080/10916466.2014.950383
[10] Nalinakshan, S., Sivasubramanian, V., Ravi, V., Vasudevan, A., Sankar, M.S.R., Arunachalam, K., 2019. Progressive crude oil distillation: An energy-efficient alternative to conventional distillation process, Fuel, 239, 1331-1337. https://doi.org/10.1016/j.fuel.2018.11.033
[11] Hou, J., Li, X., Sui, H., 2015. The optimization and prediction of properties for crude oil blending, Computers & Chemical Engineering, 76, 21-26. https://doi.org/10.1016/j.compchemeng.2015.02.006
[12] Shaoping, L., Luoyong, D., Benxian, S., Lijuan, Z., Feng, T., Xinru, X., Jingyi, Y., Beilei, Z., 2011. The distillation yield and properties of ternary crude oils blending, Petroleum Science and Technology, 29(3), 271-281. https://doi.org/10.1080/10916460902882800
[13] Radelyuk, I., Tussupova, K., Klemeš, J.J., Persson, K.M., 2021. Oil refinery and water pollution in the context of sustainable development: Developing and developed countries, Journal of Cleaner Production, 302, 126987. https://doi.org/10.1016/j.jclepro.2021.126987
[14] Dai, X., Wang, X., He, R., Du, W., Zhong, W., Zhao, L., Qian, F., 2020. Data-driven robust optimization for crude oil blending under uncertainty, Computers & Chemical Engineering, 136, 106595. https://doi.org/10.1016/j.compchemeng.2019.106595
[15] Ramesh, M., Deepa, C., Kumar, L.R., Sanjay, M.R., Siengchin, S., 2022. Life-cycle and environmental impact assessments on processing of plant fibres and its bio-composites: A critical review, Journal of Industrial Textiles, 51(4_suppl), 5518S-5542S. https://doi.org/10.1177/1528083720924730
[16] Gu, W., Wang, K., Huang, Y., Zhang, B., Chen, Q., Hui, C.W., 2015. Energy optimization for a multistage crude oil distillation process, Chemical Engineering & Technology, 38(7), 1243-1253. https://doi.org/10.1002/ceat.201400130
[17] Jabbar, K.J., Zein, S.H., Hasan, A.H., Ahmed, U., Jalil, A.A., 2023. Process design Optimisation, heat integration, and techno-economic analysis of oil refinery: A case study, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45(2), 4931-4947. https://doi.org/10.1080/15567036.2023.2205365
[18] Ledezma-Martínez, M., Jobson, M., Smith, R., 2018. Simulation–optimization-based design of crude oil distillation systems with preflash units, Industrial & Engineering Chemistry Research, 57(30), 9821-9830. https://doi.org/10.1021/acs.iecr.7b05252
[19] Hazra, S., Morampudi, P., Prindle, J.C., Fortela, D.L.B., Hernandez, R., Zappi, M.E., Buchireddy, P., 2023. Torrefaction of Pine Using a Pilot-Scale Rotary Reactor: Experimentation, Kinetics, and Process Simulation Using Aspen Plus™, Clean Technologies, 5(2), 675-695. https://doi.org/10.3390/cleantechnol5020034
[20] Demirbaş, A., 2012. Fuels for petroleum, coal and biomass, Energy Education Science and Technology Part A-Energy Science and Research, http://openaccess.sirnak.edu.tr/xmlui/handle/11503/1368
[21] Speight, J.G., 2006, The chemistry and technology of petroleum. CRC press, 984 pages.
[22] Gary, J.H., Handwerk, J.H., Kaiser, M.J., Geddes, D., 2007. Petroleum refining: technology and economics. CRC press, 488 pages.
[23] Stout, S.A., Douglas, G.S., Uhler, A.D., 2016. Chemical fingerprinting of gasoline and distillate fuels, in Standard Handbook Oil Spill Environmental Forensics, Elsevier, 509-564. https://doi.org/10.1016/B978-0-12-803832-1.00011-8
[24] Kaes, G.L., 2008. Refinery Process Modeling: A Practical Guide to Steady State Modeling of Petroleum Processes (using Commercial Simulators), Elliott & Fitzpatrick; First Edition, 397 pages.
[25] Koohestanian, E., Sadeghi, J., Mohebbi-Kalhori, D., 2017. Simulation, and design of petroleum, gas, and chemical processes using Aspen Plus, Jahad Daneshgahi Press, 456 pages.
[26] The American Society of Mechanical Engineers (ASME), 2012. Section VIII Div. 1.
[27] Koohestanian, E., Sadeghi, J., Mohebbi-Kalhori, D., Shahraki, F., Samimi, A., 2021. New Process Flowsheet for CO2 Compression and Purification Unit; Dynamic Investigation and Control. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 40(2), 593-604. https://doi.org/10.30492/ijcce.2020.37779
[28] Parkash, S., 2003. Refining processes handbook. Gulf Professional Publishing, 728 pages.
[29] Aspen Plus, 2011, Aspen Plus Documentation Version V7. 3. Aspen Tech, Cambridge, MA, USA, 366 pages.
[30] Ferris, A.M., Rothamer, D.A., 2016. Methodology for the experimental measurement of vapor–liquid equilibrium distillation curves using a modified ASTM D86 setup. Fuel, 182, 467-479. https://doi.org/10.1016/j.fuel.2016.05.099
[31] Hosseini, S.M., Soleymani, M., Kelouwani, S., Amamou, A.A., 2023. Energy recovery and energy harvesting in electric and fuel cell vehicles, a review of recent advances. IEEE Access, 11, 83107-83135. 10.1109/ACCESS.2023.3301329 | ||
|
آمار تعداد مشاهده مقاله: 354 تعداد دریافت فایل اصل مقاله: 284 |
||