| تعداد نشریات | 31 |
| تعداد شمارهها | 825 |
| تعداد مقالات | 7,903 |
| تعداد مشاهده مقاله | 14,563,093 |
| تعداد دریافت فایل اصل مقاله | 9,430,220 |
A Compact, High Efficiency, and Portable Wireless EV Resonant Charger | ||
| International Journal of Industrial Electronics Control and Optimization | ||
| مقاله 4، دوره 8، شماره 2، شهریور 2025، صفحه 137-148 اصل مقاله (1019.12 K) | ||
| نوع مقاله: Research Articles | ||
| شناسه دیجیتال (DOI): 10.22111/ieco.2024.49636.1611 | ||
| نویسندگان | ||
| Jasem Shahsevani؛ Reza Beiranvand* | ||
| Tarbiat Modares University, Faculty of Electrical and Computer Engineering, Tehran, Iran | ||
| چکیده | ||
| Efficient and versatile charging solutions are essential for modern applications requiring portable energy systems. This paper presents a novel portable charger powered by an isolated split-core current clamp, enabling direct charging from power lines. The system utilizes inductive coupling to draw AC current from these lines, which is then regulated to a precise voltage for battery replenishment. The proposed design features an interleaved resonant topology with a semi-active rectifier, achieving high efficiency and adaptability to a wide range of input voltages. This architecture supports a variable DC bus voltage, enabling the resonant converter to operate optimally near its resonant frequency for maximum performance. To ensure a lightweight and efficient design, the converter eliminates traditional transformers, incorporating a capacitive element within the resonant network for galvanic isolation. A cascaded dual-control strategy in the interleaved structure ensures precise voltage regulation. Designed to be compatible with 1-6 cell Li-Ion batteries, the charger offers extensive versatility. Experimental results from a 2.5-200 W prototype, with an output voltage range of 4.2-25.2 V, demonstrate a peak efficiency of 94%, validating the effectiveness of the proposed charger for grid-connected applications. | ||
| کلیدواژهها | ||
| AC/DC converter؛ Charger؛ EV charger؛ Interleaved converter | ||
| مراجع | ||
|
[1] J. Shahmoradi, E. Talebi, P. Roghanchi, and M. Hassanalian, "A comprehensive review of applications of EV technology in the mining industry," EVs, vol. 4, no. 3, p. 34, 2020.
[2] J. Shahsevani and R. Beiranvand, "An ApplicationOriented Review of the LLC-Based Resonant Converters," IEEE Access, 2024. [3] A. Muharam, T. M. Mostafa, and R. Hattori, "Design of power receiving side in wireless charging system for UAV application," in 2017 International Conference on Sustainable Energy Engineering and Application (ICSEEA), 2017: IEEE, pp. 133-139. [4] D. Vincent, P. S. Huynh, L. Patnaik, and S. S. Williamson, "Prospects of capacitive wireless power transfer (C-WPT) for unmanned aerial vehicles," in 2018 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (Wow), 2018: IEEE, pp. 1-5. [5] K. I. Kilic and L. Mostarda, "Heuristic EV pathfinding over optimized charging station grid," IEEE Access, vol. 9, pp. 164070-164089, 2021. [6] H. Huang and A. V. Savkin, "Deployment of charging stations for EV delivery assisted by public transportation vehicles," IEEE Transactions on Intelligent Transportation Systems, 2021. [7] C. H. Choi, H. J. Jang, S. G. Lim, H. C. Lim, S. H. Cho, and I. Gaponov, "Automatic wireless EV charging station creating essential environment for continuous EV operation," in 2016 International Conference on Control, Automation and Information Sciences (ICCAIS), 2016: IEEE, pp. 132-136. [8] T. Campi, S. Cruciani, M. Feliziani, and F. Maradei, "High efficiency and lightweight wireless charging system for EV batteries," in 2017 AEIT International Annual Conference, 2017: IEEE, pp. 1-6. [9] J. Chen, C. W. Yu, and W. Ouyang, "Efficient wireless charging pad deployment in wireless rechargeable sensor networks," IEEE Access, vol. 8, pp. 39056-39077, 2020. [10] A. M. Jawad, H. M. Jawad, R. Nordin, S. K. Gharghan, N. F. Abdullah, and M. J. Abu-Alshaeer, "Wireless power transfer with magnetic resonator coupling and sleep/active strategy for a EV charging station in smart agriculture," IEEE Access, vol. 7, pp. 139839-139851, 2019. [11] T. Campi, S. Cruciani, F. Maradei, and M. Feliziani, "Innovative design of EV landing gear used as a receiving coil in wireless charging application," Energies, vol. 12, no. 18, p. 3483, 2019. [12] A. Rohan, M. Rabah, M. Talha, and S.-H. Kim, "Development of intelligent EV battery charging system based on wireless power transmission using hill climbing algorithm," Applied System Innovation, vol. 1, no. 4, p. 44, 2018. [13] A. M. Jawad et al., "Wireless EV charging station using class-E power amplifier in vertical alignment and lateral misalignment conditions," Energies, vol. 15, no. 4, p. 1298, 2022. [14] A. Carloni, F. Baronti, R. Di Rienzo, R. Roncella, and R. Saletti, "On the Sizing of the DC-Link Capacitor to Increase the Power Transfer in a Series-Series Inductive Resonant Wireless Charging Station," Energies, vol. 14, no. 3, p. 743, 2021. [15] A. Rohan, M. Rabah, F. Asghar, M. Talha, and S.-H. Kim, "Advanced EV battery charging system," Journal of Electrical Engineering & Technology, vol. 14, no. 3, pp. 1395-1405, 2019. [16] J. Zhou, B. Zhang, W. Xiao, D. Qiu, and Y. Chen, "Nonlinear parity-time-symmetric model for constant efficiency wireless power transfer: Application to a EV-inoperation wireless charging platform," Ieee transactions on industrial electronics, vol. 66, no. 5, pp. 4097-4107, 2018. [17] D. Raveendhra, M. Mahdi, R. Hakim, R. Dhaouadi, S. Mukhopadhyay, and N. Qaddoumi, "Wireless charging of an autonomous EV," in 2020 6th International Conference on Electric Power and Energy Conversion Systems (EPECS), 2020: IEEE, pp. 7-12. [18] K. Sang-Won, C. In-Kui, and H. Sung-Yong, "Comparison of charging region differences according to receiver structure in EV wireless charging system," in 2017 International Conference on Information and Communication Technology Convergence (ICTC), 2017: IEEE, pp. 1058-1060. [19] S. W. Kim, I. K. Cho, and S. Y. Hong, "Design of transmitting coil for wireless charging system to expand charging area for EV applications," Microwave and Optical Technology Letters, vol. 60, no. 5, pp. 1179-1183, 2018. [20] C. Cai, J. Wang, H. Nie, P. Zhang, Z. Lin, and Y.-G. Zhou, "Effective-configuration WPT systems for EVs charging area extension featuring quasi-uniform magnetic coupling," IEEE Transactions on Transportation Electrification, vol. 6, no. 3, pp. 920-934, 2020. [21] A. Raciti, S. A. Rizzo, and G. Susinni, "EV charging stations over the buildings based on a wireless power transfer system," in 2018 IEEE/IAS 54th Industrial and Commercial Power Systems Technical Conference (I&CPS), 2018: IEEE, pp. 1-6. [22] R. Wu, S. B. Dewan, and G. R. Slemon, "A PWM AC-toDC converter with fixed switching frequency," IEEE Transactions on Industry Applications, vol. 26, no. 5, pp. 880-885, 1990. [23] P. N. Enjeti and S. A. Choudhury, "A new control strategy to improve the performance of a PWM AC to DC converter under unbalanced operating conditions," IEEE Transactions on Power Electronics, vol. 8, no. 4, pp. 493- 500, 1993. [24] S. Cuk, "A new zero-ripple switching DC-to-DC converter and integrated magnetics," IEEE Transactions on Magnetics, vol. 19, no. 2, pp. 57-75, 1983. [25] B. Arnet and L. P. Haines, "High power DC-to-DC converter for supercapacitors," in IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No. 01EX485), 2001: IEEE, pp. 985-990. [26] S. Kim and F.-S. Kang, "Multifunctional onboard battery charger for plug-in electric vehicles," IEEE Transactions on Industrial Electronics, vol. 62, no. 6, pp. 3460-3472, 2014. [27] F. Musavi, M. Craciun, D. S. Gautam, W. Eberle, and W. G. Dunford, "An LLC resonant DC–DC converter for wide output voltage range battery charging applications," IEEE Transactions on Power Electronics, vol. 28, no. 12, pp. 5437-5445, 2013. [28] N. Bagheri, H. Alipour, L. Mohammadian, J. Beiza, and M. Ebadpour, "A Multiport isolated resonant LLC converter for grid-tied renewable energy powered bidirectional EV charger," International Journal of Industrial Electronics Control and Optimization, vol. 6, no. 1, pp. 37-48, 2023. [29] E. L. Carvalho, A. Blinov, P. Emiliani, A. Chub, and D. Vinnikov, "Three-phase bidirectional isolated AC–DC matrix-converter with full soft-switching range," IEEE Access, vol. 11, pp. 119270-119283, 2023. [30] I. Burgardt, C. B. Nascimento, A. A. Badin, and R. Gules, "An Integrated AC-DC Isolated Converter Electrolytic-Free with Intrinsic Active Low-Frequency Ripple Reduction," IEEE Access, 2024. [31] Y. Y. Zandabad and S. S. Fazel, "A single-stage variable output AC-DC converter with PFC and soft-switching for renewable energy integration," Energy Reports, vol. 11, pp. 4873-4885, 2024. [32] A. Singh, J. Gupta, and B. Singh, "Design and control of two stage battery charger for low voltage electric vehicles using high gain buck-boost PFC AC-DC converter," IEEE Transactions on Industry Applications, vol. 59, no. 5, pp. 6125-6135, 2023. [33] A. D. Kumar, J. Gupta, and B. Singh, "A single-stage charger for lev based on quadratic buck-boost AC-DC converter topology," IEEE Transactions on Industry Applications, vol. 59, no. 4, pp. 4252-4263, 2023. [34] V. Ramya and R. Marimuthu, "Integration of AC/DC With Multi Input Mode Selection Converter for Fast Charging of Battery in Electric Vehicles," IEEE Access, 2024. [35] J. Shahsevani and R. Beiranvand, "A Bidirectional Resonant Converter for Capacitive Power Transmission in Electric Vehicle and PowerWall Applications," in 2023 31st International Conference on Electrical Engineering (ICEE), 2023: IEEE, pp. 264-270. [36] V. Suel and S. Kizir, "A Comprehensive Loss Analysis of Half-Bridge LLC Resonant Converter used in LED Street Lights," in 2019 1st Global Power, Energy and Communication Conference (GPECOM), 2019: IEEE, pp. 146-151. [37] C.-H. Yang, T.-J. Liang, K.-H. Chen, J.-S. Li, and J.-S. Lee, "Loss analysis of half-bridge LLC resonant converter," in 2013 1st International Future Energy Electronics Conference (IFEEC), 2013: IEEE, pp. 155-160. [38] J. Yi, H. Ma, X. Li, S. Lu, and J. Xu, "A Novel Hybrid PFM/IAPWM Control Strategy and Optimal Design for Single-Stage Interleaved Boost-LLC AC–DC Converter With Quasi-Constant Bus Voltage," IEEE Transactions on Industrial Electronics, vol. 68, no. 9, pp. 8116-8127, 2020. [39] R. Saasaa, W. Eberle, and M. Agamy, "A single-stage interleaved LLC PFC converter," in 2016 IEEE Energy Conversion Congress and Exposition (ECCE), 2016: IEEE, pp. 1-6. [40] Z. Lu and L. Wei-Ming, "A Single-Stage LED Driver Using Step-Down Cuk/LLC with APWM-PFM Hybird Control," in 2018 15th China International Forum on Solid State Lighting: International Forum on Wide Bandgap Semiconductors China (SSLChina: IFWS), 2018: IEEE, pp. 1-4. [41] D. Rozario, N. A. Azeez, and S. S. Williamson, "A modified resonant converter for wireless capacitive power transfer systems used in battery charging applications," 2016, Art no. 7520272, doi: 10.1109/ITEC.2016.7520272. [42] E. Rong, S. Li, R. Zhang, X. Du, Q. Min, and S. Lu, "A magnetic integration half-turn planar transformer for LLC resonant DC-DC converters," in 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), 2018: IEEE, pp. 484-488. [43] H. Hu, X. Fang, F. Chen, Z. J. Shen, and I. Batarseh, "A modified high-efficiency LLC converter with two transformers for wide input-voltage range applications," IEEE Transactions on Power Electronics, vol. 28, no. 4, pp. 1946-1960, 2013, doi: 10.1109/TPEL.2012.2201959. [44] D. Shu and H. Wang, "An Ultrawide Output Range ${LLC} $ Resonant Converter Based on Adjustable Turns Ratio Transformer and Reconfigurable Bridge," IEEE Transactions on Industrial Electronics, vol. 68, no. 8, pp. 7115-7124, 2020. | ||
|
آمار تعداد مشاهده مقاله: 412 تعداد دریافت فایل اصل مقاله: 362 |
||