Using Response Surface Methodology (RSM) to Evaluate the Drag Reduction by Polyacrylamide, Experimental and Statistical Investigation

[1] Toms, B.A., 1948. Some observation on the flow of linear polymer solution Through straight tubes at large Reynolds number, paper presented at Proceeding of the First International Congress on Rheology, North Holland, Amsterdam.

[2] Virk, P.S., 1975. Drag reduction fundamentals. AIChE Journal, 21(4), 625-656. https://doi.org/10.1002/aic.690210402

[3] Den Toonder, J., Draad, A., Kuiken, G., Nieuwstadt, F., 1995. Degradation effects of dilute polymer solutions on turbulent drag reduction in pipe flows. Applied Scientific Research, 55(1), 63-82. https://doi.org/10.1007/BF00854224

[4] Kim, N.-J., Kim, S., Lim, S.H., Chen, K., Chun, W., 2009. Measurement of drag reduction in polymer added turbulent flow. international communications in heat and mass transfer, 36(10), 1014-1019. http://dx.doi.org/10.1016/j.icheatmasstransfer.2009.08.002

[5] Raei, B., Peyghambarzadeh, S.M., 2021. Experimental Investigation of Drag Reduction in Turbulent Flow Using Biological and Synthetic Macromolecules: A Comparative Study. Journal of Chemical and Petroleum engineering, 55(1), 117-137. http://dx.doi.org/10.22059/jchpe.2021.307767.1323

[6] Sung, J., Kim, C., Choi, H., Hur, B., Kim, J., Jhon, M., 2004. Turbulent drag reduction efficiency and mechanical degradation of poly (acrylamide). Journal of Macromolecular Science, Part B, 43(2), 507-518. https://doi.org/10.1081/MB-120029784

[7] Chen, Y., Niu, P., He, M., Li, C., Nechval, A.M., Valeev, A.R., Yang, P., 2025. Turbulent drag reduction behavior of polymer solutions in different geometries. Energy, 323, 135798. https://doi.org/10.1016/j.energy.2025.135798

[8] Chen, Y., Lin, X., He, M., Yang, P., Li, C., Nechval, A.M., Valeev, A.R., 2025. An experimental investigation on the turbulent drag reduction effect of polyacrylamide solution in the loop pipe. Journal of Pipeline Science and Engineering, 100264. https://doi.org/10.1016/j.jpse.2025.100264

[9] Xu, J., Zhou, N., Zhang, J., Yao, Y., Wang, H., Liu, S., 2025. Study on rheological properties of large particle gangue slurry and its drag reduction effect caused by wall slippage in pipeline transportation. Powder Technology, 452, 120573. https://doi.org/10.1016/j.powtec.2024.120573

[10] Barbosa, K.C.O., Soares, E.J., Khalil, M.C., Karnitz, O., 2025. Polymer drag reduction in dispersed oil–water flow in tubes. International Journal of Multiphase Flow, 183, 105064. https://doi.org/10.1016/j.ijmultiphaseflow.2024.105064

[11] Zhou, Z., Li, M., Ge, Z., Zhang, X., Tang, Y., Cui, J., Gong, S., 2025. Drag reduction characteristics of RJD-suitable surfactant-polymer composite fluids under high shear. international communications in heat and mass transfer, 160, 108341. https://doi.org/10.1016/j.icheatmasstransfer.2024.108341

[12] Shi, P.-f., Hu, H.-b., Wen, J., Xie, L., 2024. Drag reduction and degradation of binary polymer solutions. Journal of non-newtonian fluid mechanics, 105279. https://doi.org/10.1016/j.jnnfm.2024.105279

[13] Brandfellner, L., Muratspahić, E., Bismarck, A., Müller, H.W., 2024. Quantitative description of polymer drag reduction: Effect of polyacrylamide molecular weight distributions. Journal of non-newtonian fluid mechanics, 325, 105185. https://doi.org/10.1016/j.jnnfm.2024.105185

[14] Cheng, Z., Zhang, P., Wang, X., Song, X., Dai, X., Gao, L., Zhang, X., Zhang, G., Lu, Y., 2024. Drag reduction and degradation by sodium alginate in turbulent flow. Scientific Reports, 14(1), 16854. https://doi.org/10.1038/s41598-024-67873-2

[15] Pereira, A.S., Andrade, R.M., Soares, E.J., 2013. Drag reduction induced by flexible and rigid molecules in a turbulent flow into a rotating cylindrical double gap device: Comparison between Poly (ethylene oxide), Polyacrylamide, and Xanthan Gum. Journal of non-newtonian fluid mechanics, 202, 72-87. https://doi.org/10.1016/j.jnnfm.2013.09.008

[16] Sandoval, G.A., Soares, E.J., 2016. Effect of combined polymers on the loss of efficiency caused by mechanical degradation in drag reducing flows through straight tubes. Rheologica Acta, 55(7), 559-569. https://doi.org/10.1007/s00397-016-0927-6

[17] Sitaramaiah, G., Smith, C.L., 1969. Turbulent drag reduction by polyacrylamide and other polymers. Society of Petroleum Engineers Journal, 9(02), 183-188. https://doi.org/10.2118/2405-PA

[18] Jouenne, S., Anfray, J., Cordelier, P.R., Mateen, K., Levitt, D., Souilem, I., Marchal, P., Lemaitre, C., Choplin, L., Nesvik, J., Waldman, T., 2015. Degradation (or lack thereof) and drag reduction of HPAM solutions during transport in turbulent flow in pipelines. Oil and gas facilities, 4(01), 80-92. https://doi.org/10.2118/169699-PA

[19] Raei, B., Shahraki, F., Peyghambarzadeh, S.M., 2018. Experimental study of the effect of drag reducing agent on heat transfer and pressure drop characteristics. Experimental Heat Transfer, 31(1), 68-84. https://doi.org/10.1080/08916152.2017.1353557

[20] Graham, M.D., 2004. Drag reduction in turbulent flow of polymer solutions. Rheology reviews, 2(2), 143-170.

[21] Tiong, A.N.T., Kumar, P., Saptoro, A., 2015. Reviews on drag reducing polymers. Korean Journal of Chemical Engineering, 32, 1455-1476. https://doi.org/10.1007/s11814-015-0104-0

[22] Abubakar, A., Al-Wahaibi, T., Al-Wahaibi, Y., Al-Hashmi, A., Al-Ajmi, A., 2014. Roles of drag reducing polymers in single-and multi-phase flows. Chemical Engineering Research and Design, 92(11), 2153-2181. https://doi.org/10.1016/j.cherd.2014.02.031

[23] Brostow, W., 2008. Drag reduction in flow: Review of applications, mechanism and prediction. Journal of Industrial and Engineering Chemistry, 14(4), 409-416. https://doi.org/10.1016/j.jiec.2008.07.001

[24] Asidin, M., Suali, E., Jusnukin, T., Lahin, F., 2019. Review on the applications and developments of drag reducing polymer in turbulent pipe flow. Chinese Journal of Chemical Engineering, 27(8), 1921-1932. https://doi.org/10.1016/j.cjche.2019.03.003

[25] Han, W.J., Dong, Y.Z., Choi, H.J., 2017. Applications of water-soluble polymers in turbulent drag reduction. Processes, 5(2), 24. https://doi.org/10.3390/pr5020024

[26] Rushd, S., Ferroudji, H., Yousuf, H., Walker, T.W., Basu, A., Sen, T.K., 2024. Applications of drag reducers for the pipeline transportation of heavy crude oils: A critical review and future research directions. The Canadian Journal of Chemical Engineering, 102(1), 438-458. https://doi.org/10.1002/cjce.25023

[27] Soares, E.J., 2020. Review of mechanical degradation and de-aggregation of drag reducing polymers in turbulent flows. Journal of non-newtonian fluid mechanics, 276, 104225. https://doi.org/10.1016/j.jnnfm.2019.104225

[28] Zhang, K., Lim, G.H., Choi, H.J., 2016. Mechanical degradation of water-soluble acrylamide copolymer under a turbulent flow: Effect of molecular weight and temperature. Journal of Industrial and Engineering Chemistry, 33, 156-161. https://doi.org/10.1016/j.jiec.2015.09.031

[29] Zhang, X., Duan, X., Muzychka, Y., 2018. New mechanism and correlation for degradation of drag-reducing agents in turbulent flow with measured data from a double-gap rheometer. Colloid and Polymer Science, 296(4), 829-834. https://doi.org/10.1007/s00396-018-4300-4

[30] Brostow, W., 1983. Drag reduction and mechanical degradation in polymer solutions in flow. Polymer, 24(5), 631-638. https://doi.org/10.1016/0032-3861(83)90119-2

[31] Habibpour, M., Clark, P.E., 2017. Drag reduction behavior of hydrolyzed polyacrylamide/xanthan gum mixed polymer solutions. Petroleum Science, 14(2), 412-423. https://doi.org/10.1007/s12182-017-0152-7

[32] Choi, H.J., Kim, C.A., Sohn, J.-I., Jhon, M.S., 2000. An exponential decay function for polymer degradation in turbulent drag reduction. Polymer Degradation and Stability, 69(3), 341-346. https://doi.org/10.1016/S0141-3910(00)00080-X

[33] Karami, H.R., Rahimi, M., Ovaysi, S., 2018. Degradation of drag reducing polymers in aqueous solutions. Korean Journal of Chemical Engineering, 35(1), 34-43. https://doi.org/10.1007/s11814-017-0264-1

[34] Virk, P., Sherman, D., Wagger, D., 1997. Additive equivalence during turbulent drag reduction. American Institute of Chemical Engineers. AIChE Journal, 43(12), 3257.

[35] Lumley, J.L., 1977. Drag reduction in two phase and polymer flows. Physics of Fluids (1958-1988), 20(10), S64-S71. https://doi.org/10.1063/1.861760.

[36] Tulin, M.P., 1967. Hydrodynamic aspects of macromolecular solutions. Technical Report 353-4, Hydronautics Incorporated, Research in Hydrodynamics, Washington DC, USA.

[37] Ozmen, Y., Boersma, B.J., 2023. An experimental study on friction reducing polymers in turbulent pipe flow. Ocean Engineering, 274, 114039. https://doi.org/10.1016/j.oceaneng.2023.114039

[38] Cheng, Z., Zhang, X., Song, X., Wang, X., Zhang, G., Lu, Y., Li, L., Liu, F., Dai, X., 2023. Investigation of drag reduction by slurry-like drag-reducing agent in microtube flow using response surface methodology (RSM). Scientific Reports, 13(1), 22433. https://doi.org/10.1038/s41598-023-49804-9

[39] Raei, B., 2023. The effect of polymeric drag reducing agent on pressure drop reduction in circular pipes: Experimental and statistical investigation. Journal of the Indian Chemical Society, 100(3), 100905. https://doi.org/10.1016/j.jics.2023.100905

[40] Varnaseri, M., Peyghambarzadeh, S.M., Amiri, M., 2018. Experimental study on optimum concentration of polyacrylamide for drag reduction and heat transfer performance in a compact heat exchanger. Heat and Mass Transfer. https://doi.org/10.1007/s00231-018-02533-6

[41] Sandoval, G., Trevelin, R., Soares, E., Silveira, L., Thomaz, F., Pereira, A., 2018. Polymer degradation in turbulent drag reducing flows in pipes. RETERM-Thermal Engineering, 14(2), 03-06. https://dx.doi.org/10.5380/reterm.v14i2.62123

[42] Lim, S., Choi, H., Lee, S., So, J., Chan, C., 2003. λ-DNA induced turbulent drag reduction and its characteristics. Macromolecules, 36(14), 5348-5354. https://doi.org/10.1021/ma025964k

[43] Liberatore, M.W., Baik, S., McHugh, A.J., Hanratty, T.J., 2004. Turbulent drag reduction of polyacrylamide solutions: effect of degradation on molecular weight distribution. Journal of non-newtonian fluid mechanics, 123(2-3), 175-183. https://doi.org/10.1016/j.jnnfm.2004.08.006

[44] Khadom, A.A., Abdul-Hadi, A.A., 2014. Performance of polyacrylamide as drag reduction polymer of crude petroleum flow. Ain Shams Engineering Journal, 5(3), 861-865. http://dx.doi.org/10.1016/j.asej.2014.04.005

[45] Andrade, R.M., Pereira, A.S., Soares, E.J., 2016. Drag reduction in synthetic seawater by flexible and rigid polymer addition into a rotating cylindrical double gap device. Journal of Fluids Engineering, 138(2), 021101. https://doi.org/10.1115/1.4031229

[46] Varnaseri, M., Peyghambarzadeh, S., 2020. The effect of polyacrylamide drag reducing agent on friction factor and heat transfer coefficient in laminar, transition and turbulent flow regimes in circular pipes with different diameters. International Journal of Heat and Mass Transfer, 154, 119815. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119815

[47] Liu, D., Wang, Q., Wei, J., 2018. Experimental study on drag reduction performance of mixed polymer and surfactant solutions. Chemical Engineering Research and Design, 132, 460-469. https://doi.org/10.1016/j.cherd.2018.01.047

[48] Varnaseri, M., Peyghambarzadeh, S., 2020. Comprehensive Study of the Effect of the Addition of Four Drag Reducing Macromolecules on the Pressure Drop and Heat Transfer Performance of Water in a Finned Tube Heat Exchanger. Journal of Macromolecular Science, Part B, 59(11), 747-773. https://doi.org/10.1080/00222348.2020.1801194

[49] Rho, T., Park, J., Kim, C., Yoon, H.-K., Suh, H.-S., 1996. Degradation of polyacrylamide in dilute solution. Polymer Degradation and Stability, 51(3), 287-293. https://doi.org/10.1016/0141-3910(95)00182-4

[50] Mohsenipour, A.A., Pal, R., Prajapati, K., 2013. Effect of cationic surfactant addition on the drag reduction behaviour of anionic polymer solutions. The Canadian Journal of Chemical Engineering, 91(1), 181-189. https://doi.org/10.1002/cjce.20686

[51] Li, E., Zheng, L., Li, Y., Fan, L., Zhao, S., Liu, S., 2022. Investigation of the drag reduction of hydrolyzed polyacrylamide–xanthan gum composite solution in turbulent flow. Asia‐Pacific Journal of Chemical Engineering, 17(5), e2791. https://doi.org/10.1002/apj.2791

[52] Tolstikh, L., Akimov, N., Golubeva, I., Shvetsov, I., 1992. Degradation and stabilization of polyacrylamide in polymer flooding conditions. International Journal of Polymeric Materials, 17(3-4), 177-193. https://doi.org/10.1080/00914039208041113

[53] Xiong, B., Loss, R.D., Shields, D., Pawlik, T., Hochreiter, R., Zydney, A.L., Kumar, M., 2018. Polyacrylamide degradation and its implications in environmental systems. npj Clean Water, 1(1), 17. https://dx.doi.org/10.1038/s41545-018-0016-8

[54] Dubief, Y., Terrapon, V.E., White, C.M., Shaqfeh, E.S., Moin, P., Lele, S.K., 2005. New answers on the interaction between polymers and vortices in turbulent flows. Flow, turbulence and combustion, 74, 311-329. https://doi.org/10.1007/s10494-005-9002-6

[55] White, C.M., Mungal, M.G., 2008. Mechanics and Prediction of Turbulent Drag Reduction with Polymer Additives. Annual review of fluid mechanics, 40(1), 235-256. https://dx.doi.org/10.1146/annurev.fluid.40.111406.102156

[56] White, F.M., 2001. Fluid Mechanics,  fourth ed ed,  McGraw-Hill, Inc,  New York.

[57] Moffat, R.J., 1988. Describing the uncertainties in experimental results. Experimental Thermal and Fluid Science, 1(1), 3-17. http://dx.doi.org/10.1016/0894-1777(88)90043-X

[58] Moraveji, M.K., Razvarz, S., 2012. Experimental investigation of aluminum oxide nanofluid on heat pipe thermal performance. international communications in heat and mass transfer, 39(9), 1444-1448. https://doi.org/10.1016/j.icheatmasstransfer.2012.07.024

[59] Samimi, A., Zakeri, M., Maleki, B., Mohebbi-Kalhori, D., 2015. Experimental and statistical assessments of the mechanical strength reliability of gamma alumina catalyst supports. Particuology, 21, 74-81. https://doi.org/10.1016/j.partic.2014.10.002

[60] Zakeri, M., Moghadam, H., Samimi, A., Mohebbi-Kalhori, D., 2019. Optimization of calcium alginate beads production by electrospray using response surface methodology. Materials Research Express, 6(9), 095412. https://dx.doi.org/10.1088/2053-1591/ab3377

[61] Esfe, M.H., Wongwises, S., Naderi, A., Asadi, A., Safaei, M.R., Rostamian, H., Dahari, M., Karimipour, A., 2015. Thermal conductivity of Cu/TiO2–water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlation. international communications in heat and mass transfer, 66, 100-104. https://doi.org/10.1016/j.icheatmasstransfer.2015.05.014

[62] Lau, H.-L., Wong, F.W.F., Abd Rahman, R.N.Z.R., Mohamed, M.S., Ariff, A.B., Hii, S.-L., 2023. Optimization of fermentation medium components by response surface methodology (RSM) and artificial neural network hybrid with genetic algorithm (ANN-GA) for lipase production by Burkholderia cenocepacia ST8 using used automotive engine oil as substrate. Biocatalysis and Agricultural Biotechnology, 50, 102696. https://doi.org/10.1016/j.bcab.2023.102696

[63] ÖZbayoğlu, M., Ercan, C., 2010. PHPA as a frictional pressure loss reducer and its pressure loss estimation. Petroleum Science and Technology, 28(6), 625-631. https://doi.org/10.1080/10916460903070371