تعداد نشریات | 29 |
تعداد شمارهها | 641 |
تعداد مقالات | 6,336 |
تعداد مشاهده مقاله | 9,889,944 |
تعداد دریافت فایل اصل مقاله | 6,484,163 |
Investigating the effect of magnetic field on the forced convection of cross-corrugated triangular channels | ||
Challenges in Nano and Micro Scale Science and Technology | ||
مقاله 4، دوره 6، Special Issue، فروردین 2018، صفحه 20-28 اصل مقاله (675.42 K) | ||
نوع مقاله: Original Research Paper | ||
شناسه دیجیتال (DOI): 10.22111/tpnms.2018.23878.1142 | ||
نویسندگان | ||
Arash Mahboubidoust* 1؛ Amirhosein Ghasemi1؛ Abbas Ramiar2؛ Pouyan Vatani3 | ||
1Thermofluid Department, Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran | ||
2Babol University of Technology | ||
3Thermofluid Department, Faculty of Mechanical Engineering, Sharif University of Technology, Tehran, Iran | ||
چکیده | ||
Cross-corrugated triangular channels increase heat transfer in heat exchangers. The mixing effect increases the heat transfer coefficient at the surfaces. In this study, the fluid flow and heat transfer in a triangular corrugated channel are modeled under two constant heat fluxes and different Reynolds numbers. In order to validate, k-ω turbulence model is used. Also, the effect of magnetic field is investigated in different locations of the channel and the channel entrance area is shown as the optimal area for application of the magnetic field both in terms of heat transfer coefficient and friction coefficient. It is also observed that the Nusselt number always increases with Reynolds increase, but the friction coefficient only increases when the magnetic field is positioned at the entrance area of the channel with the Reynolds increase and decreases in other cases. The presented results can be helpful for improving the performance of plate heat exchangers. | ||
کلیدواژهها | ||
Convection heat transfer؛ Cross-corrugated triangular channel؛ Magnetic field؛ Nusselt number؛ OpenFOAM | ||
آمار تعداد مشاهده مقاله: 1,063 تعداد دریافت فایل اصل مقاله: 445 |